Viewing all customer Discussions for:

90-257 Face Mount Keeper, 7/16"

It slides into the frame. I purchased one from Home Depot but the shoes are too far apart and will not slide far enough into the frame

I have windows and need to replace the keepers i did order keeper but they are wrong size and returning them the ones i ordered were item #90-257

Looking for this lock and keeper. Has numbers of AS-9056 and AS-9057. Pics as follows. Any help on this would be appreciated since all locks and keepers are broke in the house.

I need 2 different lengths and weight tolerances. The first ones are1/2 in wide and 34 inches long with wings and have 33 3 CO Caldwell printed on the side. The second ones are the same width with wings and are 28 inches by 1/2 inches and have 27 4 FP Caldwell printed on them. I tried but can't f ... (cont.)

Parts do not show any markings or names

Hi there!I need 4 of these sash window locks. Double hung windows.No markings. Diecast metal. Off white2-1/16" center to center screw hole distance. 8/16" screw hole offset from the keeper side of the sash lockFace mount keeper. Keeper screw holes 7/8" from the keeper opening and 7/16" apart. I remo ... (cont.)

window sash lock, cast metal Part inscription on the back 30621Hello, can you help me find this replacement part? Thank you!

NEED A NEW KEEPER #30621

Hello: We have recently bought our co-op and all of the window latches are broken. We are attaching photos. We've had several contractors look at them, but no one has been able to tell us who manufactures them. There are no identifying marks on the pieces and the windows only have a "made in the USA ... (cont.)

I need like 8 of these. Ryan Homes Patriot windows. Single hung. Thanks

Face Mount Keeper Similar to 90-169

Hello, My window won't quite latch. Is there a latch like this that is adjustable so that it will engage properly. I am off by a little more than 1/16" Thanks, -Andre

I need some of each of these parts for my vintage 2005 Farley windows. Can you point me in the right direction?

Hello, I have looked everywhere to find a replacement striker with no luck. I can take additional photos if needed.Also I attached a photo of the window label when it was new. Thanks for any help.

7/16" Center holes. 1 1/2" height, 1.56" length. 30621 is a part number on the back side.

Hi, Can you help me identify and replace this?At the widest the latch is 40mm wide. The latch width at the screw holes is about 20mm wide. The center of the screw holes is about 10mm. I manged to break it while trying to get the window locked. The house was built to a previous owner in late 1990's. ... (cont.)

Any idea how to get these out and what to replaced them with? They are inserted into the vinyl window frame (versus surface mounted) and I haven't been able to remove them after removing the screws.

I think this is a Patriot window sash lock. I hope you have replacements. Thank you. Dana

I found one on your site (90-257) but i would have to modify it if i have to. It doesn't show the total width. Would like to fond correct one if possible.I am a contractor/homeowner

Sashes are easily removed.How do you remove them and are there any laches avaible for these windows. Thanks Robert