Viewing all customer Discussions for:

38-095 Maxim Multi-Point Lock, Medium Slider

We don't have this exact lock, but we have a couple that may work for it depending on the size of that fork. See our 38-095 and 38-096 to start out. Carefully look over our dimensions and let me know what you think.

Attached are photos of my casement lock and window pivot bar. The photos include the size.

I am missing the left casement window latch and need to order a new one. Existing right one is in the picture and is black Do you have a part for this.

Was wondering if you could identify these parts and let me know what the part numbers are so that I can order replacements. They were installed in 1996. I have the lifetime warranty but don't have all the info needed to fill out the paperwork. I think I can try and replace the parts myself but if ... (cont.)

Hi, This is a casement window lock on the left side of the window. It is missing the handle

Hello I have some casement windows I'm working on and I need a tie bar and a lock. The lock handle is about 3 inches and I saw you had two different ones I wanted to know if you had one that size. Then the tie bar is about 24 inches in length and had about 5 mental balls not the cones. Please let us ... (cont.)

I am looking for this latch for a 2850 Alenco Casement window

weathershield visions 3000 casement lock whiteID # in the glass L81117000221103

Do you have a replacement available for this window lock? Thank you

Dimensions Screw Holes 3 13/16" apart Fork 1 5/8" Deep, 7/8" Wide OD We have about 200 Traco Casement and Slider windows in a couple of buildings and have not been able to find replacement parts for them. Any help would be appreciated.

Crestline windows referred me to this site to find a replacement part for a casement window lock/latch. The window was installed in 2003 or 2004. I am hoping you have this part.

When I take latch out measurements are 1/2? wide x 4 5/8 high. Which latch do I need I do not see sizes of hole requirements. If you could let me know part number looking for. Much appreciated Thanks

Egress window latch is missing. Broke off. This is a 4200 series window with crank to open. Latch must be engaged to open and engaged when closed to lock shut. I need the replacement?

One of my windows cranks but it doesn?t actually close. I can pull the window closed but the gear inside or something is broken, I need a new one.Another window I have had the lock handle break off. The pictures are of non broken pieces. The picture of the crank handle is the correct side but two ... (cont.)

Hole is 4-1/4" by 3/8". Nami manufacturer? Casement window Need lock.

I need help locating the latch for this awning window. Can you help me out I attached some pictures. Please let me know if you can help. Thanks Steve B.

Do you have a latch to fit my application? Looks like your 38-096 but your finger dimension 1 5/8 on mine is 1 3/8.

Can you help me find the part for this? Manufacturer unknown.

My name is Gene . I'm looking for this item. Thanks The measurement of the arm of my operator is 12". There are no known stamped numbers on the operator. Width of the body 5-1/8"8 installation holes to screw into base Will also need the handles

Do you have a window latch for this Vetter casement window? It was installed in 2004.Thanks, Jim