Viewing all customer Discussions for:

38-095 Maxim Multi-Point Lock, Medium Slider

I enclose a copy of both a working lock and the broken one.

I'm looking for one each, left and right Roto Casement window locks. The c-c screw is 3-7/8". I've seen some on ebay and the Roto model number is: 34-126. I need them in white and can't find any. As well am looking for a Roto Casement window left hand window operator as shown in the second pictur ... (cont.)

Good afternoon, I'm trying to find a replacement part for our garden/bay window. The locking mechanism broke and, after being removed by a repair person to attempt part identification, it was never returned (hence the picture showing a missing piece). The base portion is just shy of 4.5" long and 1 ... (cont.)

Sirs/Ms;I am in need of some slide locks for vertical casement windows. It is a total of 50 7/8 inches long. It has "locking buttons" that are 3/8 of an inch in diameter and stand out 1/4 inch. They are placed, from the top, at 3.75", 19.125", 34.5", 44.375", and 50". The bar itself is .5" ... (cont.)

I have no part numbers but I did order other replacement parts for these windows a few years ago, order 646625 if that helps. I need two of these lever handles or whatever unit it is I need to replace these. Thanks,Cat

We don't have this exact lock, but we have a couple that may work for it depending on the size of that fork. See our 38-095 and 38-096 to start out. Carefully look over our dimensions and let me know what you think.

Attached are photos of my casement lock and window pivot bar. The photos include the size.

I am missing the left casement window latch and need to order a new one. Existing right one is in the picture and is black Do you have a part for this.

Was wondering if you could identify these parts and let me know what the part numbers are so that I can order replacements. They were installed in 1996. I have the lifetime warranty but don't have all the info needed to fill out the paperwork. I think I can try and replace the parts myself but if ... (cont.)

Hi, This is a casement window lock on the left side of the window. It is missing the handle

Hello I have some casement windows I'm working on and I need a tie bar and a lock. The lock handle is about 3 inches and I saw you had two different ones I wanted to know if you had one that size. Then the tie bar is about 24 inches in length and had about 5 mental balls not the cones. Please let us ... (cont.)

I am looking for this latch for a 2850 Alenco Casement window

weathershield visions 3000 casement lock whiteID # in the glass L81117000221103

Do you have a replacement available for this window lock? Thank you

Dimensions Screw Holes 3 13/16" apart Fork 1 5/8" Deep, 7/8" Wide OD We have about 200 Traco Casement and Slider windows in a couple of buildings and have not been able to find replacement parts for them. Any help would be appreciated.

Crestline windows referred me to this site to find a replacement part for a casement window lock/latch. The window was installed in 2003 or 2004. I am hoping you have this part.

When I take latch out measurements are 1/2? wide x 4 5/8 high. Which latch do I need I do not see sizes of hole requirements. If you could let me know part number looking for. Much appreciated Thanks

Egress window latch is missing. Broke off. This is a 4200 series window with crank to open. Latch must be engaged to open and engaged when closed to lock shut. I need the replacement?

One of my windows cranks but it doesn?t actually close. I can pull the window closed but the gear inside or something is broken, I need a new one.Another window I have had the lock handle break off. The pictures are of non broken pieces. The picture of the crank handle is the correct side but two ... (cont.)

Hole is 4-1/4" by 3/8". Nami manufacturer? Casement window Need lock.