Viewing all customer Discussions for:

23-181 Pivot Block

Hi, I am looking for a replacemetn part for a Stanley Series 4900 Frameless Mirror Bi-Fold Door. Attached is a photo of the part, and the manual for the door. The part I am looking for is the piece that connects the door to the track.

Hello... A friend of mine brought to my attention that the Painter removed the Metal Mirror Sliding Glass Door and now it doesn't work.... I've uploaded ALL The pictures taken from the Broken Part... It appears that the Bottom has a spring and it seems to have been broken as it has no Spring Action. ... (cont.)

The wheel is broken that runs on the bottom track

Your help center assisted me in ordering the proper corner block that I needed, which was 23-407. But now it looks like I need the glider anchor screw for whatever it's called. I'm attaching photos and hoping you can help me find the replacement part as this is now old and worn.

Please let me know what parts I need for my glass bi-fold closed doors. See photos. 1.Corner block for with Roller for the bottom 2.Corner block for bottom 3.Corner block with Roller for the top 4.Corner block with pin for the top

bottom fixed door pin housing sheared were pin engages bottom door support Need new housing or entire bottom corner piece. Location : facing mirror left side bifold bottom attachment. Photos attached. Mirror bifold only has a attached tag simply stating Sunshine Mirror Any help would be apprecia ... (cont.)

Hello my mother lives in a community for 18 yrs. She is the org owner. A few yrs ago 1 dr sticks and is basically stuck. I have tried to replace the rollers and pins to no avail. What can i do? I would like to fix it for her but i live in Chicago. I come down often but dont stay in fl ... (cont.)

I understand that acme 17 -4405 has been discontinued. Here are photos of a 48" and 30" inch set of mirrored bifold doors to repair. I believe I could use 3 screw driver bottom 21-092 6 pivot blocks 23-181 3 bottom drivers with rollers Am I missing any hardware that you might see from t ... (cont.)

I need the new guide rollers for a set of mirror bifold doors. They currently have cox hardware.

Hi, Can you help me find low profile top and bottom tracks for a mirrored bifold door? We installed hardwood floors and need to find another half inch so our doors fit again. The pin length adjustments on the doors aren't enough. Current tracks are 3/4" tall, 1" wide and 70.5 inches long. Looki ... (cont.)

Hi, I need to replace the parts shown in Pic 1. I believe that consists of a Pivot Block (#23-181), a Corner Block (#23-407) & a Screw Driver Bottom Pivot (#21-092). Please confirm that your Corner Block is reversible and can be used for the Right corner and the Screw Driver Bottom Pivot is meant to ... (cont.)

Need the bottom pin with spring. Broke while removing. About 15 years old. See photos

Hi I need more part for mi mirror bifold closet

My closet door is not able to close correctly. My handy man says that the bottom left corner block is not working well and the screw is not able to go in and attach properly to the bottom part and therefore the door is not high enough to roll properly on the rail. Do you think that the corner bloc ... (cont.)

Hi -- I just moved into an apt and the mirrored closet door doesn't open or close because I think the door is too low and the bottom edge of the door can't get over the track. I tried to adjust the height but it is not working. Would like to get your advice on what parts to replace to make it work ... (cont.)

We were hit by Superstorm Sandy's tidal surge with a foot of water throughout our house. In the frenzy of the tearout, workers removed our mirrored bi-fold closet doors in our bedroom and though the doors were set aside and saved,the bottom pivots and tracks were discarded. We have two sets, 48" w ... (cont.)

I am looking for a Self-adjusting Bi-fold bottom Roller. Cox 43-051. Its length is like 2 inche long. I have attached the pic, please let me know if your company have the part.