Viewing all customer Discussions for:

81-244 Sliding Glass Door Roller, Pella

I'm wondering if you have replacement rollers for my door. There's 4 pictures attched to give you a good idea. Its a Pella sliding door from approx 1985. These 2 parts caught my eye 81-249 81-098 Thanks Steve

Ordered and just received the 81-244 rollers. Unfortunately, My door has the 81-098 roller. Do you know why the 81-244 rollers would not work? Seems like they would to me. Or, should I just return these and select the 81-249 or 81-098. Still trying to figure out why the 81-098 rollers are so expe ... (cont.)

I need to replace the lower sliding wheels on my Pella Sliding Glass Door.. The door is a 9681 Vent/Fixed XO Sliding French Door: Frame 95

Slider installed in 2005. Which is the correct roller Thanks Tony

When my home was built in 1978 or 79 a Pella sliding glass door was installed leading to the deck. The door is wooden construction but has no metal cladding. After careful inspection I have been unable to find a model or serial number on the door. One of the roller assemblies has failed making the d ... (cont.)

I cant find a model, marking or other info about this pella door. My roller near the handle is loud and feels bumpy. I'm guessing the bearings are worn out. I want to replace both sets but don't see anything in web images like my set with what appears to be wings or tabs that hold it in place when i ... (cont.)

what is the difference between roller 81-249 and 81-244 Thank You Donald

Sliding glass door roller, no markings on hardware

Pella designer series wood clad slider installed about 15 yrs ago Struggling to read the inscription on door Think it says sgoo 2020- ?? John

I need to replace the rollers on my Pella 5

WHAT IS CORRECT ROLLER FOR PELLA 8FT SLIDING DOORS DATED 1985?

I believe my Pella sliding door's rollers have been slowly going over time. It's been getting more difficult to open each time I do. I also noticed that my rubber bumper stop is cracking. My Pella door is approximately 10 years old. I'm looking to replace the above mentioned parts. Thank you in ... (cont.)

I have a vinyl Pella sliding patio door. I need to replace the rollers. The product ID is difficult to read but looks like MO210047776-NFRC May 7 2003 94 Can you help with which are the appropriate replacement parts ?

Looking to see if you carry these patio door rollers. I saw that on your website there is a similar product, product #81-098 but the original ones on the patio door have a metal lip that bends to the bottom of the door plate? Does that matter. Thank you

Can you tell me if these are sold in sets?

Question: I have a Pella Wood Sliding door purchased in 1995 I would like to replace the rollers. PART Number on Pella Receipt is: 1F/DFXO26 1F/DF012 Can you recommend a roller replacement part? also Do you have a video or instructions on how to replace? Thanks Joe

Require 2 new roller assemblies. What do you recommend I replace them with?

It appears either the 81-098 or the 81-244 is what I need. How can I tell the difference in what I have. I need stainless steel due to salt water.

Hello, I have a house built in 1987 that has a "between the pane" blind Pella patio door. Pella said it was a Designer Series. Which set of roller do I need as the old ones are worn out? Thanks, Jack

I have a 4 panel pella glass sliding door, about 14 years old. Middle 2 panels operative, two end panels fixed. The operative door on the right is scraping against the bottom of fixed panel when I open it. The door is sitting on the track at the bottom, but not dead center on the top ( like the ... (cont.)