Viewing all customer Discussions for:

23-306 Bi-Fold Door Top Pivot Bracket

Need to replace the hard ware for my closet door. The track is 24 inches wide. There are 2 door that are hinged together.. Can you please recommend replacement parts.

Hi,Hopefully, this is enough info. I really want to keep the doors but need to replace the brackets. Any help would be greatly appreciated. Thank you!Sincerely,Deborah

Do you have the track for your part number 23-306? I also have Stanley part number 2819 pivot bracket. I would like the track to be 48" in length so I can use one track. Your help is appreciated. Thank you.

Do you have a part similar to this that would work on a bifold door? Ours is 3" long. The door is 35" x 80"

I took the 2 panel door down to paint and misplaced the hardware and can't figure out how to get it back on track.

Thank you for your excellent service and products! I just ordered a bunch of window balances and associated parts. Please look at the attached pictures and let me know if/how to adjust this type of auto-close door hardware so that it works again.

My closet door came out and all I have at top of door is a plastic nub sticking out. I would like to know what parts I need to do to get it fixed. I have included pics. It seems I need a pivot cap and some type screw.

Looking to replace Phillips head looking roller in picture. Any chance you have the part?

Hardware on my bi fold doors has failed. Please see 4 attached files. "guide.jpg" This is the stationary guide and is cracked. I need a replacement. "slide.jpg" 'Stanley' and '2819' are stamped on this slide. The slide is OK. I am including this picture for reference. "track.jpg" The tra ... (cont.)

Attached are pictures of my 72

I need to replace the track for a 5 foot set of bi-fold doors in a house I am currently working on. The top glides say 'ACME' with the number 2811. Do you have a track that works with those glides? Thanks, Kay

Need a bi-fold door screw to repair door.

very flat topped panhead. 9/16" from top of head to bottom of screw. Approx. 1/4" diameter (no gauge on hand.) This if from an older bi-fold closet door.

My bifold doors uses a stanley 2819 part to secure the top of the stationery rotating door ... do you have a replacement

Need brackets for older bifold doors. Thanks!

What size screw is needed for the 23-306 bracket?

So glad to find this piece....we only needed the screw and could not find it or anything comparable anywhere.....we were ready to replace all the hardware in the door and the track to the tune of $28.00!!! Happy I came upon your site. Thank You