Viewing all customer Discussions for:

15-198 Balance Clip Attachment

I'm seeking a replacement channel balance as shown in the attached images

The MI window is 17 years old, and when they sent me a new balancer, it had the round connection down at the bottom for the pin coming out of the window. As you can see by my pictures, I need something with a flat rectangular type pin.

Please find pix of 16"x 1/2" channel and parts from 36x37 Pella replacement double hung w tilt out. Some of the parts are broken and not entirely sure which new ones I need. Many thanks. DB

I need a replacement block and tackle for a tilt window. The rod is 27 inches long, 1/2" deep, and 1/2" wide, straight, and has "27G BSI" markings on it. I have attached pictures to help you identify the part. I also need the tilt window latch. I tried to take a picture of the part where the wind ... (cont.)

I need two of these balances. I can't see the size of the shoe. Can you? How long will they take? I have heard just a couple of days but I have also heard more than a month.

My part has "28E" engraved on the outside of the channel. I believe this is the 765 but your description says the top is a screw in type clip. Mine has an actual clip that is installed into a hole in the window frame. I have several that I need to replace that have come detached from the window. ... (cont.)

S795 with a hook Count (2)

Hi, can you provide window balances that will directly replace this?

Looking to make sure I'm ordering the correct balance before I order them. Metal channel measures is 26" long and 9/16" wide. It is stamped with a 26C BS and looks like is probably your S795-26, but mine has a hook clip on top, where the one in you photo is a screw in clip. Thanks for your help. ... (cont.)

It is 34 inches long has numbers and letters 34D R BSI on the side. The window is 3x6. Bottoms folds open.

I have several windows where the channel balance will no longer stay connected to the window.

Two Balances are need for a Pella ThermaStar Double Hung Tilt Window. Window Info as follows: 2432 Window Top Sash 13 PELLA JUN22011 IGCC?/IGMA? W0202346975 NFRC PEL-N-108 Bottom Sash 14 PELLA JUN22011 IGCC?/IGMA? W0202346975 NFRC PEL-N-108 Balance Marking - 16B BSI EP Assistance is appreciated t ... (cont.)

I am trying to figure out the model of this window balance. Metal to Metal Length is 36 inch. Width is between 1/2 and 5/8. It is a plain balance with a metal hook in thr top and and shoe on the bottom.

I need to place an order for S795 channel balances with the hook attached. The specific quantity is ten (10) S795-27E and two (2) S795-21G. Please process a material part number so I may execute and the order as soon as possible. Thank you.

Hi everyone,I have this balance it's exactly like series 795 channel balance I was read all the customer questions about it and I noticed that this kind of hook needs to be custom, so I need 22 of them.The length is 36C and I will send you a couple of pictures for the shoe size.And I need 2 balances ... (cont.)

Do you have these? The balance is 26" long the shoe is an 1" wide. The jamb it fits into is an 1-1/4" I need 18 of each.

I just want to give you all information that you need to correctly identify what I need. Here are photos requested which should better show information. Need 2 each S795 series and stamping is 28D which is for 23-28 pounds sash weight. Need hook end balance clip attachment 15-198. You mentioned t ... (cont.)

Good Afternoon, I am looking to purchase (2) S795-34 balances, but will need the hook installed instead of the tab, and a 15-194 shoe, as mine measures 1". Stamp on my balance is 34B. Thank you!

I am in need of replacement block and tackle window balances for a few windows in my recently purchased house. Unfortunately, I am unsure of the window manufacturer. The channel length is 29", with a width and depth of 1/2". The part number on the balance is 03/10 Unique 28-A-10. Any assistance woul ... (cont.)

WANTED TO SEE IF YOU CARRY THE BALANCE STRIP OR THE PART THAT FITS ON THE BOTTOM THAT FAIL. IF YOU HAVE A BALANCER THAT FITS OR HAVE ONE THAT IS MORE ROBUST, PLEASE LET ME KNOW. THESE WINDOWS WERE INSTALLED IN 2008. NAMI NEFC 100/200 (SERIES BMDH) (MST 3856)