Viewing all customer Discussions for:

18-174 5/8" Top Sash Guide, Alenco

just looking for this piece. windows are alenco. window dimensions are 22 1/2x 57 3/4 (inner measurement). the channel balance measures 9/16 or 1/2".

Hi, I double hung windows on my house and I broke some top sash cam (black) and bottom sash clip (white). Attache are their pictures and its channel width is 5/8". Could you please let me know if you have these parts? If so please let me know their part ID's and if not please let me know where to f ... (cont.)

Channel balance C 27 stamp. 1/2"X 28" long. non tilt, single hung window. installed in early 80's Thanks!

This is the cap piece that holds the channel balance at the top of the window frame. It is 1 1/4 x 3/4 x 5/8 inches. It goes with an Alenco window. The channel balance is a 2730 and 28"

I need to replace 6 window balances and 6 Sash Guides. The window balance rail is 28" and stamped 27C. I believe the Sash Guide is part # Alenco 18-174. I believe that the top of the balance is part number 19-002 and the shoe is 15-001. Please look at my pics to make sure that i am correct. ... (cont.)

Good afternoon, I am looking for sash hardware for "Action Windows" , Mfr code : AWT-1, 2000 series ( H - R55 - 44X71) I looked on your website but could not distinquish the necessary parts. I would appreciate any help you could give me in finding the necessary parts for these windows. ... (cont.)

Hello, I need to replace several balances and tops. I will ask in 2 questions as I cannot attach enough photos. First is the top. Can you tell me which model number this is?

Window is made by BSF. The balance is 28"long, channel is 1/2". The only markings I can find are 27 3. The first few pictures show the black plastic piece that broke that holds the balance in place. Not sure if I need a whole new balance or just that piece. If you have questions, please let ... (cont.)

It appears that I have 34" balance with a 19-005 top and a 15-002 shoe. The balance is stamped 3350. Does this combination appear to be correct? These are not tilt metal framed windows in a condo.

My windows are made by Alenco, and I'm assuming they were the originals in this home Lancaster California built in 1989. They are worn out and need to be replaced. I'm attaching photos of one of the balances. And here are the measurements: length from plastic tip to tip = 29" (metal only is 28" lon ... (cont.)

I need to get two replacement balances for my AlenCo Window. I've attached four photos for your review. It has part 2740 stamped on it. The metal piece measures 28 inches. Do you have a replacement for this balance? Thanks,

I've been called in after 2 others "worked" on this window. Alenco non-tilt alum slider 45 1/2 W X 29 3/8 H thermal pane w mullion enclosed. The owner said the channel balancers were replaced (so I don't know if they are correct. They are 1/2 " marked 2690 @ 29) Both top sash guides are missing. ... (cont.)

I have an Alenco window with a block and tackle system. The window has missing a black plastic piece on each side of the window. When closed the channel balances rise up thru the opening . They appear to keep the channel balances in place. Are they called Balance tops? or Face guides? I have a ... (cont.)