Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

The part needed is for the outer edge of the bottom sash of Gorell windows. See the two photos. The bubble is 1/4". The stripping is T-shaped, with the outside strip at 7/16", the inside strip at 3/8" and the depth at 1/8". I will measure the quantity needed if you can supply this part. Thanks for ... (cont.)

Please help suggest, I am looking for two different seals i have in my double pre hung window, the first window seal attached 1087-88-9 slimier to 58-164-5 but unsure it fits another product ( 2nd gasket is ) Wool Pile that i need as 2nd part that go around to make air tight. image 1090 and 96 Th ... (cont.)

I am trying to locate a, replacement, bottom weather seal for this window. The company has gone out of business. I am attaching a picture of the current seal which is torn into 2 pieces, not real clear. If needed, I could send a sample of the old seal. Please advise. Thank you, Jim Pic ... (cont.)

My window has wool pile and bubble seal. The wool pile currently measures 3/16 x 5/32, but it has been flattened a bit. Should I move up to 3/16 x 3/16? The bubble seal has a diameter of 5/16. It runs along the bottom edge of each window in the double hung unit. Not sure what kind to choose. ... (cont.)

I am looking for two types of weatherstripping for my double hung windows. One is on the inside bottom of the upper window and seals between the top and bottom window. The second one is on the outside of the bottom window and seals the bottom window against the sill. Image_2949 and Image_2952 shows ... (cont.)

I have 19 windows they all need the bottom seal replaced.

This is the stripping that came off the window when I opened it. It has split into 3 pieces, hope the pics are good. FYI, it is suppose to be all white, so probably somebody needs to wash some windows....just saying.

Bottom sash seal on vinyl windows purchased about 2004. Slides into t slot on outside vertical face, seals on bottom bulb against sill. Need enough for 8 30" windows.

I know I need a T slot foam filled bulb weather seal, but I am not sure which size. I have photographed a section of an old seal with a ruler in hopes you can help me identify the correct size I need.

I need a part ID for the bottom of vinyl windows.

the T on this vinyl bulb seal slides in a slot on the bottom of the window.when shut it the bulb seals the window. The t is an 1/4 inch please advise if you need additional information. I am at the point of installing any alternative that will work.

trying to find these replacement parts for my Louisanna Pacific windows

Some windows are: 3/16" X 3/8" BUBBLE SEAL Product Code: 58-135 and some are either .270 T-SLOT FOAM FILLED BULB WEATHERSEAL,12FT Product Code: 58-171 or .187 T-SLOT FOAM FILLED BULB WEATHERSEAL,12FT Product Code: 58-182. What's the difference between .270 and .187?

Trying to find replacement window weather stripping. As best as I can measure, Bubble/Foam about a quarter inch Extension 3/8 - Top of I-Beam section extending away from the bubble/foam. T section 1/8 - Small section connecting top/bottom of I-Beam Base 1/4 - Bottom of I-Beam section furth ... (cont.)

The two dimensions listed (bulb diameter and "h" leg) match the bulb seal that I'm replacing. Before purchasing, I'd like to confirm the overall height. The seal that I'm replacing measures 3/4". Can you confirm the height of 58-171?

Do you by chance have this type of weather stripping? This goes on the bottom of my windows. It is extremely brittle. I think the oval shape should be round. I appreciate any help. Thank you Mitchell

Im trying to find a replacement seal for capitol windows.

I just purchased .270 T-Slot Foam Filled Bulb Weatherseal part no 58-171 from your company, order #785291. After removing the old weatherstrip, is there some trick or special tool for getting the new seal into the window's T-Slot without destroying it? Thank you.

I have no markings on the Windows at all.

Hi. Bought my windows from a company who is now out of business. I took pictures (attached) with a ruler next to it. There is some info on the inside of the window casing but I'm at work right now and don't have that info. I think it is a foam filled offset bulb. Looking on your site I think ... (cont.)