Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

Just purchased a house built in 1997 with Alenco AL windows. There is a problem locking every window in the house. They all close but need to go another 1/8" or sometimes less for the lock blade to fit into the locking groove. You can force them shut, putting enormous pressure on the upper frame ... (cont.)

Replaced my windows in 2005 with vinyl double hung Windows with half screen. Noticed that my weatherstripping at bottom of window has deteriorated from weather. Where can I get replacement

I need new seals for my windows. House was built in 2002. Double Hung Vinyl Windows. I was told they are Ply Gem. See included picture. This is the bottom seal.

I purchased T.270 foam weather stripping item#58-171 and the plastic that slides into the slot on window is to large. Does the T.187 item# 58-182 have smaller plastic strip or is that the foam size?

Hello Swisco experts, You helped me find window cranks for a bay window. Now I need weatherstripping for the same bay window. It is similar, tho' not identical to Offset-T-Slot-Foam-Filled-Bulb/pd/Bubble-Seal/58-171 or Bubble-Seal-9_32-inch/pd/Bubble-Seal/58-055 Any ideas about which would work ... (cont.)

Is your T-Slot Foam Filled Bulb Weatherseal, vinyl or silicon? If it is vinyl then will it stick to latex paint?

I made a drawing, but I did not have a program to convert it to any forms that you would accept, so I took a photo of the screen. The second photo is the profile I was drawing. the third shot is the outside side of the strip. Will the bubbles keep the window from going down far enough to lock? ... (cont.)

Hello, We have Kolbe and KVW windows in our house, which was built in 2000. The weather stripping on basically all of the windows is shot. I'm hoping you can tell me what I need to replace the weather stripping for these particular windows. Correct me if I'm wrong! I've also attached photos of the b ... (cont.)

Hi, I am looking for a replacement bubble seal for my Moss windows and have provided several pics of it since I cannot seem to find it on your site. Please provide your recommendation for replacement. Thanks!

The piece is missing the rubber piece, I just need to know what piece to order

I need to replace all bulb seals. The picture and drawing I believe match your 58-171. Looking for confirmation of that or a better match. Appreciate your help and I'm looking to order asap. Thanks Tom

Single hung vinyl windows about 15 years old. The weather strip is 32 1/2 inches long and simply slides into a grove on the bottom part of the window sash. Please advise if you sell a replacement. Thanks.

Weather stripping

on window: 85ws28049211nhlhd H. D. Fisher 21515973 1305092.7 06/01 z03

Please help me select the correct T-Slot Foam Filled Bulb Weather seal item number

We can't find any identifying marks on the window or stripping. We have several windows that have rotting weather strip.

Attached is a picture of weather strip off of a Atrium window. We have been in contact with them and they do not supply that part anymore and gave me your email. MFR. Code AB-1, Series 7700/7730 SH, H-R30-48x72, H-R50*-36x72 (MODIF). This is off a sticker that was on the window and there is no ot ... (cont.)

Hi, Looking for vinyl weather strip for tilt window. I don't have any markings on the window to identify the manufacture. The vinyl strip is on a T track like system. The second picture shows the vinyl dry rotted with the track exposed. Thanks for any assistance

Weatherstrip is rubber or vinyl with no foam fill, black. .270" width t-slot offset, with oval bubble .350" wide by .190" high, overall height from flat to other side is .400" Windows are from Heritage Windows in Gilbert Arizona.

Please find an attachment with photo of dimensions of my wetherstrip.