Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

I am looking for white bubble seal weatherstripping. The base extension is 7/16 and the diameter of the bubble is 1/4 of an inch. I know the vinyl windows are about 20 years old but I could not find any marking to identify them.

I'm not sure which part to order as I 58-171 .270 (not sure what that number means) or the 58-182 .187. Thanks. Joanne

This is the bulb seal that I need for several of our apartment windows. Can you help me with an item number?

Do you have any replacement window weatherstripping similar to this? It goes on a Danvid brand vinyl single hung window manufactured in 2000/2001. I have also attached the window manufacture sticker if that helps. Thanks Steve

I am looking for slide in bubble weatherstripping that slide in bottom sash. App measurement are bulb 5/16 of an inch. Two edges are appx 3/16 and 1/8 inch. Distance between two edges is about 9/16. Also attaching images.

Hello Swisco! I have vinyl windows (I think the brand was Carefree) in my home and the bottom sash has this "t"slot bulb seal. I need about 20' to replace on many of the windows where the bulb has ripped off. Let me know. Thank you, Mike

I was looking for this seal for a window I was wondering if you have it.

I need to replace the bubble seals at the base of my windows in the house we just bought. They appear very similar to the 58-182 you stock except for being slightly smaller in every dimension. Your 58-182: 7/8" overall height, 3/16" T-bar width, 3/8" foam diameter My unidentified strip: 5/ ... (cont.)

58-171?

I matched part #58-164 to my window fairly easy. Can i use part # 58-171? The peice that slips into a pre-existing groove in the sash on part 58-164 is 3/16" and 5/8" over all in height. Part 58-171 is in 100 th. measurements. Part 171 has a Foam Filled Bulb is that better than 164 vitch is ... (cont.)

need weather strip

Dear SWISCO, Looking at your website on-line I came across your product code 58-171. While the picture and description seem right. I thought I would send you a couple pictures to get your opinion before I complete my order. Thank you, Todd

Photographs attached. The "T" that slides into track is 1/4". Do you have in stock? I will need for 10 windows.

I need to replace a lot of my windows bubble seal weather striping, it appears to me that I have to take the window "apart" to remove and replace this ??

Good afternoon. I have a foam filled weatherseal with a 3/16". It's very similar to the 58-171 weatherseal, but has the smaller slot. Would you be able to help me locate a replacement for my 3/16" T-Slot foam seal?

I need to replace my weatherstripping. thank you for helping me identify the right product to order. diane

I cannot find any markings on the weather stripping. I do know the windows are from MI (Metal Industries) The windows are about 17 years old. Your Offset T-Slot Foam Filled Bulb Weatherseal,12ft Product Code: 58-171 looks similar but I'm not sure of the dimensions you have posted. If th ... (cont.)

looking for offset filled bulb weatherseal for simonton window lower sash slot approximatley 5/32 wide. Charles

One parts is for the bottom of a vinyl window and the second parts is for the sides of the vinyl window. Hopefully you will have something that I can use. Robert

I have MI - Capitol windows in my home - built 1997. The bulb seal on the bottom window has deteriorated on most of them so I'm looking for a place to purchase replacements. I've pulled the seal out of the "T" slot on one window to take to a local Lowes and Home Depot, but they don't carry parts e ... (cont.)