Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

I have a bunch of the Alenco Windows installed in my house. The windows are good and I replaced the balencers with new ones that I ordered from your company; they work great! But I am having a problem finding the right wheather stripping for the bottom of the window to keep the dirt and dust out w ... (cont.)

Hi, i have 12 year old m&w vinyl windows, im looking for sash weather stripping that slides in the bottom of window, if I sent you a sample, do you think you have these in stock, I need about 700 inches, or 22 individual at 28 3/4 inches...please see attached image

Windows are out of warranty, registered w. Simonton as Order # 2749151. They are double-hung vinyl frames with two latches per sash. Need 2 of the latch shown. The latch is numbered 30502 on the inside. I call them latches because technically they aren't locks. I didn't find anything close on ... (cont.)

I am in need of 156' of window seal. Please see attached pics to see if you can help. Thank You Tom

Hello, I am looking to replace the Bubble seal gaskets in my single-hung windows. Drawing not to scale Thanks Paul

The seals at the bottom of my white vinyl windows (new build in 1998) are beginning to fall apart and most will need replacing. Photos attached - I don't know the window manufacturer....? Randal

Thank you for posting. Please take a look at our 58-164 Offset T-Slow Foam Filled Bulb Weatherseal. It has a slightly different configuration, but its "T" is only 3/16" wide. Would that be better?

not sure what kind of window i have. my guess is I need part# 58-171? Thanks for your help. Great website

Good afternoon, and thanks for posting! Please see SWISCO product58-171 Offset T-Slot Foam Filled Bulb Weatherseal, this looks very similar. Compare the measurements to see if it will work for you.

My weather stripping measures about 9 mm across the foam diameter. The "extension" measures about 7 mm from the bubble to the tip of the extension, as suggested in your video. Your 58-171 measurements are taken from the diameter of the bubble, and the the width of the extension channell - rather ... (cont.)

I need to know what kind of windows these came off of to replace the weather strip. Do you have this type of ws. The wider tan strip is off the frame and the smaller brown strip is off of the sash. Thanks, Sean

replaced today what we removed was hollow bulb (and it was falling apart) never thought about replacing it but this seemed to work even better. Im assuming its pretty mush the same but gives better seal on my 1987 double hung vinyl window

will the swisco product code 58-171 work on m/w windows-single hung- vinyl window manfactured in 2001

I know the manufacturer of my windows. they are capitol Series 7500 series windows. The windows were installed in 2003. I am unsure about the sizing that i need. I think 58-171. I am sending you some pictures. These are 2 differenet seals for the same window. one of them goes on the underside ... (cont.)

trying to find replacement weather stripping for windows. have ordered two different peoducts from your website unable to conme up with correct one. need a little help I have tried 58-164. 58-171 looks to be a cross from 58-164 measurements with the foam filled seal thnx mark w

I need to replace the weatherstripping on vinyl/aluminum windows manufactered in 1998 with no manufacturer identified other than the code 3MI974 stamped on the inside frame of the double pane glass frame. The weatherstripping is an offset t-slot foam filled bulb type similar to product code 58-171 i ... (cont.)

I am trying to figure out how to replace the bubble seal on my windows. The replacement windows were done around 1996 and I took ownership in 2009. There are no markings on the window to tell me what brand they are, other than a stamping inside the glass "JDI 96" (pic attached). There are two scr ... (cont.)