Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

Hello all, Please recommend a replacement coil balance and the pivot bar, also need a pice of seal. Thanks

Hi,I'm looking to replace all my United Window bottom seals on my double hung windows. Home build 20 years ago. Lee

I need to replace a few pieces of weatherstripping for my Traco windows. Mostly the felt type strips. I also need a couple of locking parts for the top of the windows. Thanks, Darryl Marx

NEED TO REPLACE BOTTOM SEALS ON 6 TILT IN WINDOWS ( ~ 30" WIDE). THEY ARE ABOUT 18 YEARS OLD AND MADE BY SEASONSHIELD, INC. PROFILE PICTURES ARE INCLUDED.

Can you tell me what would replace this?

Looking to confirm the weatherstripping for bottom of windows. Pictures attached.

Looking for balance assembly parts for Twinseal Windows as well as weather strips. Original install date is around 1999 or 2000.

Can you help ID this weatherstripping for the same window? The metal portion is 16" long and is roughly 1/2 by 1/2 an inch, slightly over. The stamp says 16C BSI. Open or closed cam, I am not sure but here is a pic and i think i should replace the entire unit as on of the cams has a broken pie ... (cont.)

I need to find replacements for these types of weatherstripping

Hi,I ordered your 58-171 .270' weather stripping thinking the .270 would be the slot in which it would fit... but no, it is the diameter of the seal itself. it doens't work.What I need is a seal that will attach inside of a 1/4" slot around the peremiter of the face of the door.do you have such a p ... (cont.)

I believe I have Alside swing and clean windows and need help finding replacement weather seals for the windows. I have attached photos of the seal as well as what I believe is the window product number sticker. I hope you can help me find the necessary replacement seals. Sincerely, ... (cont.)

Caps the bottom of windows.It is foamy to the touch under the bottom of the windows.It is 3/8 inches deep on the bottom and goes up 1/2 inch onto the outside;The 1/2-inch on the outside is what has deteriorated

Hello! Can you identify replacement parts for these images? Appreciate it! There is two types of weather stripping and one right side latch. Appreciate it!

Looking for approximately 250 feet of this bottom window seal.

Hi there I'm looking at replacing the rubber seal on the bottom of my kinco sash windows. Photos included Thank you

Hi. Do you carry a replacement for this kind of seal? The slot is pretty close to 1/4" ? too wide for the typical Lowe's type.

Good evening,I am requesting help in determining the correct bubble seal for windows. I was able to get a picture. The windows are 5 years old and I know the rest of the seals will need to be replaced once I figured out how to remove them?But any assistance with this one will be greatly appreciated. ... (cont.)

Could you help me identify the seal at the bottom of my lower window? I removed the lower window so I could slide out the seal from a T groove to take pictures of it. The seals foam filled lower piece has dry rotted and detached from the main piece of the seal that attaches to the window. Thank you! ... (cont.)

Looking to replace window weatherstripping along the bottom of SeasonShield windows from 2001.The stripping is NOT attached w adhesive but by pushing into a channel along the window front, and a tubular rubber ness is along the bottom. Thank you. Bon

Please help me identify the correct replacement bubble seal for my 2001 Simonton windows