Viewing all customer Discussions for:

84-104 Screen Door Roller, 1-1/4" Dia Steel

Do you have 4 of these? also do you have secondary piece that holds the roller. In photo, it has the screws and I'm not sure if you have this part.

I am trying to find replacement for all four or eight of these rollers, it's a Jeld Wen Patio door. the ones on top are white and the bottom two are grey, (possibly installation instructions). If not available something they can be replaced with. I can use the ones on the second sliding door that we ... (cont.)

I cannot find any markings on the screen door or patio door frame. Can you help identify these parts and do you stock them? All four corners appear to be the same and screen door appears reversible. I need keeper for the latch as well but have reached the max photo upload limit and will have to su ... (cont.)

I need 2 corner 2 lower roller and 2 upper roller

I have a screen door that has rollers similar to your 84-104 but the frame width is only 1/4" not the 3/8" you show for 84-104. Do you know of any rollers with a smaller frame. Thanks!

The measurements seem to be: Roller diameter: 1 1/4" Roller width: 3/16" ? Entire assembly length: 2" Entire assembly width: 3/8" It seems to be very close to: 84-016 or 84-104 But the wheel width seems a bit off, and there don't seem to be hooks on these models, they have some sort of closed hoo ... (cont.)

Are you able to recommend replacements for this type of rollers and corners?

Hi, I need to order rollers (2 pieces) for a screen door. Thank you! Dipa

Sir/Ma'am, I am looking for a replacement roller for my 2014 Jeld Wen screen door. I noted on your site that you have several that look similar to the one I need by the roller dimensions are slightly different. Please let me know if this is something you can help me with. Thanks?.Don ... (cont.)

Hello - I need to replace the wheel assembly for the bottom of an Atrium sliding screen door. See pictures attached. Do you have this part? Thank you!

Trying to replace my patio screen door rollers and have been unable to get the replacement rollers to "click" onto the attachment point in the bottom of screen door. After many attempts I noticed that the older roller unit that I'm trying to replace has a longer extension from the base of the roller ... (cont.)

I need help identifying these bottom rollers on a sliding screen door. I was unable to get any type of make or model off of the slider because the labels on it were completely faded out. Can you please let me know what you think and also any advice on how to remove/install them. Thanks ... (cont.)

We have an Atrium astm 2190 arg sliding patio door that the screen door glide broken off. Is there a way to fix this?

Screen door Bottom rollers

Our sliding screen patio door is not working properly. Appears one of the rollers on the bottom is broken and the rubber piece is dry rot. We have taken the entire screen door to Home Depot and Ace Hardware with no luck. We bought this house in 2013 and this screen patio door is original from our mo ... (cont.)

I have a patio screen door that the rollers snd the back out screw rusted away. Can you help me find the replacement. I need all four rollers.

Hi, I am looking to repair a screen door that came off a Pella patio door and need all 4 angles, wheels, and adjustment screws. Can you folks help me out? Thanks a million!!

This roller is from my screen door, which was installed by Apex Windows & Bath (Phoenix & Tucson, AZ). I'm trying to identify this part. What I need is the integrated corner, since the little piece the roller clips over is broken.

I need to order inner frame corner insert

No numbers on part. Maybe Anderson? About 8 yrs old. Plastic tabs to hook glide wheel broken.