Viewing all customer Discussions for:

S385-15 15" Series 385 Channel Balance

Needing three different sizes of window balancer. They are fitting Milgard windows. On the balancers, there is printed the length and "JP CALDWELL". The 3 sizes are as such:23.4" JP CALDWELL (4 needed)20.3" JP CALDWELL (2 needed)14.4" JP CALDWELL (2 needed)All 3 sizes have the same types of ends and ... (cont.)

I need to replace this part (quantity of 2). Markings on part = 14 3 IU CMC 2 Thank you

I need 6 as in the pics. They are 27 inches on just the metal channel. Channel OD measures at 5/8" wide. I also need 2 with the channel length is 15" Longer one are marked 26 3 40 Caldwell. Shorter is marked 14 2 40 Caldwell. All end hardware/fittings are identical. These are from Mercer win ... (cont.)

1/2" channel, 15" metal channel length, milliard single hung circa 1999 or 2000. No visible stamp on channel. 8 balances needed. Thanks, Joe

Hi there, I need to replace both of these. One is completely missing and the other is shown here. Can you tell me what parts I require?

I need to replace the channel balance in bathroom window. Caldwell 14 4 EP. 15" metal channel. Both ends have plastic wings.I would like to order 2Wade

This is out of an 18-year-old Insulate single-hung window. I need a replacement part for this. The markings are 14 4 JU CMC 2.Can you please help?Thank you,Lance

Hello, I am looking to order at least 8 balance bars, and using your handy photos I think I have it narrowed down to either the 380 or 385 series. I understand the "shoe depth measurement" of 1.00" vs. 1-3/32", but I'm not sure how it should be measured (maybe add a photo somewhere easy to locat ... (cont.)

Looking for replacement for my current chann balance.

I am replacing channel balance for 5 old windows I can see that S-377 is the closest one to choose. But the top part is slightly different from the original one. Could you confirm I made the right choice?

Hello, my balance has 14 3 on it , will this cross reference to your part # S380-14, with option 1320? Metal housing is 15" in length and window is approx 7lbs.

15 inch track (not counting plastic end caps) marked: 14 4 KN Caldwell rounded plastic end cap at end with pulley pointed plastic end cap at end with spring Missing the small ropes and hook that attached to window sill

Need to replace both sides. String broke on right side window. Had to raise, won't stay in track,won't stay open.

15" Series 385 Channel Balance, 1420 for Option Will This Fit? Please verify. Thank you. See attached photos.

I'm looking to replace my channel balance but the marking seem different than what your "how to Id your channel balance" video describes. Can you help me locate the right balance?

Number 146 EV CMC 1 ITS 1/2 INCHES WIDE AND MEASURES AT 15 INCHES LENGTH METAL ONLY NOT PLASTIC

I need to replace the Channel Balance for 2 windows. They are non-tilt, 1/2" channel width, with winged top guide and winged bottom shoe. I have narrowed the selection to your S385 matching the 1 3/32" depth of the winged bottom shoe. Would you please help me interpret the markings on the current ... (cont.)

We are in need of a 27" window balance with a hook on one end. Not the straight metal piece but with a hook. I have pix of the balance identifying number 27C and of the end with the hook that i could send to someone for reference.

Hello, looking for a match to for this window balance. Can please forward me the correct match for this. Thank you.

Part numbers are too corroded to read. The metal channel is 15 inches long. Looking for help identifying a replacement. The metal tabs clips in the window channel need to be replaced also.