Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

I just bought a home and all of the balance springs, tilt rods, and tilt latches are garbage. All are broken so I am looking to revamp all 20+ windows in the home with new hardware. The old springs are the crossbow style, and they just seem to be kind of cheesy with the cord in there. Is it possible ... (cont.)

Window pin

I have attached a picture of a damaged sash tilt pin. I need to replace my 34" 34B block and tackle 795 model with broken sash tilt pin and damaged pivot lock shoes. I was going to order your standard 795 model, but the recommended sash tilt pin (26-021) is not the same size as the original pin and ... (cont.)

Need your help and advice. I just purchased two of these for my window sash. They are the perfect size and length. The holes are in the perfect place. PROBLEM IS: the screws that came with the window are too small to fit in the hole on this bar. So, what now. Do you have smaller screws ... (cont.)

Hi I have your 15-179 spiral balance lock shoe. The pivot bar on the existing window will not fit. I took several of the spiral balance hangers off of the 15-179 and put them into the old lock shoes. This worked until I broke one of the pivot bars. Now I need a bar that will fit the 15-179 lock shoe ... (cont.)

The windows were manufactured by Greaf. Not quite sure how to get the coils out, do I have put a cut in the back side of the track?

I need help finding a 2-1/2" pivot bar that matches the one in the photos. I believe it to be 3/8" thick. Sorry but please note that the ruler is in tenths of an inch. There is a number on the bar (8257 2) this is on the right hand bar and I need the left hand one. Thanks for any help you may ... (cont.)

this is a pivot bar numbers on it are 1450-3 on one side and 1638 on other side

The shoe has a metal post that comes out of it that goes into the window itself. It rotates to allow the window to tilt in. Need either a replacement shoe or the whole track. Thanks

Good Morning: We have just moved into a new home with a few windows needing replacement parts. I have identified one part (I believe) as Pivot Bar 26-021. All dimensions match except mine has three holes where your part has two. I am unable to locate the other part and am hopeful you can ass ... (cont.)

Hello, After reading all the Q & A about the 795 Channel Balance, it appears to be the correct part for my window. I will need the 15-198 balance clip attached. The channel guide has 27H stamped on it. Do you make an assembly for a window that heavy? The sash weighs 50lbs. It sags a litt ... (cont.)

Can you identify this broken part?

I am selling my house, and in the process of cleaning and fixing, I broke several pivot bars for my tilt windows. I know an inspector will note this, and wish to fix them so as to remove this issue from his report. Enclosed is a crude depiction of a broken pivot bar, with equally crude, but very ... (cont.)

Hi. I'm looking for a pivot bar for a vinyl window. It is similar to part # 26-021, but the hole next to the "T" end is 1 1/4 inch away, whereas the 26-021 is 2 invhes. Can you find that part please?

The balancer is 29 inches long and 9/19 wide and 1/2 deep. The best I could come up with on pivot shoe is 1 1/2 in wide x2 in tall. Thanks for your help

Hi there, I am debating between part # 26-433 and #26-021 can you please look at the attached picture and let me know which part is the right one for me. The hole is 1 1/4" from top to the center of the hole. Please let me know which part I should order. Thanks, Umar

Graef replacement window pivot pin

Attached pic shows my broken bar beside two samples. Sample 26-398 at bottom of pic hole placement would work but it flares at end end. The 26-360 is flat but the hole placement us wrong. Anything else that might match better? Thanks

I am trying to locate pivot bars for a vinyl window that tilts inward. The sash locks have the "Carefree" wording on them. Do you carry this replacement part?

ONE PICTURE IS OF BROKEN PART AND ONE IS NOT BROKEN. THIS IS THE PART THAT THE PIVOT ROD AT THE BOTTOM OF THE WINDOW INSERTS INTO WHICH I ALSO NEED. I WAS HOPING YOU COULD DETERMINE WHICH PIVOT ROD I HAVE ALSO. I CAN GET THAT INFO LATER IF NEEDED. I WILL ALSO NEED THE SPRING CYLINDER BUT WAS U ... (cont.)