Viewing all customer Discussions for:

82-249 Sliding Glass Door Multi-Point Keeper

Looking for a replacement lock. Picture enclosed. Lock length 10

Hello, I have this approximately 95x95 Pella glass sliding door in need of parts. Do you have replacement parts for the Lock Strike, the Lock, the interior and exterior door handle and by chance a reference for the rollers on the bottom (I don't have a photo of the bottom track rollers). Attach ... (cont.)

Hello this is my THIRD email trying to find out what part i need. I purchased a house and the previous owners removed the striker plate/keeper. The serial number shows 562#5931 PL#032-137 This is a multi latch as you can see from the picture.. The screw holes where the Striker/Keeper is ... (cont.)

I would like to replace this locking mechanism. Do you know the brand and have a replacement part for it?

My sliding door is not fitted with a keeper and I have the a multi point latch lock without a slam button. The lock is 11" on center between the screw holes (i think similar to 82-259). I have a spare latch that does come with a slam button and unfortunately I can't get the door to latch even with l ... (cont.)

I called you guys on Friday and thought best to use your identifier to help your Expert help me. The contractor who worked substantially on my house and installed these Kasson & Keller doors, has lost the handles and keepers. The factory is nearby and I picked up the supposed keepers which are s ... (cont.)

I have two styles of Superior Windows sliding doors (they are now out-of-business) - 9800 which use the 82-239 mortise lock and 9900 which use something similar. I need to replace the multi-point mortise on the 9900. The dimensions are the same as the 82-239, but the mounting holes for the face plat ... (cont.)

Looking for a dual hook mortise lock. The screw holes for the door are about 9 3/4 inches from center to center. The gap on the receiver end is about 5 5/8 inches. Hole in the door is about 3/5 inch wide and 9 1/4 inches high.

I removed the latch receiver to install a temp cat door. Now I cannot find it. Simonton sliding glass door. Just need the receiver that mounts to the frame so the door can latch. See photos

Hi, need keeper for simonton sliding glass door, part that goes on jamb.

I had a removable vinyl dog door installed here with a separate locking mechanism attached. Now that aim selling my home I need a proper keeper for the mortise lock. Here's some various measurements I took to go with attached photos. It's a Jeld-Wen door, less than 5 years old. Some various door num ... (cont.)

Hello, I am looking for a striker that would work with a two hook slider lock, I have no idea what brand of door this is, I can't find a name anywhere. I've attached pictures of the lock and the place the striker used to be!. Thank you for your help. -norm

My part looks just like your 82-259, almost same dimensions. I need only the keeper for this unit. Some person installed the partial lock on my 93 old mother's door. I just now noticed that the keeper was not installed and there is no key to this lock.I found the lever and the lock pieces. Now pl ... (cont.)

This goes on a patio, sliding door. I saw a swisco photo on the internet that most closely resembled what I have.

Do you have a replacement for this? I think my window manufacturer is Atrium handle hole spacing is 3 11/16 mortise is 10" long

Gorell sling glass door lock, (double lock) Need replacement part.

Double mortise lock with long faceplate from truth hardware. Part # 32610 Are there any replacement parts available? If so, I need several. I could also use strike plates Thanks for your help. George G.

the house I just bought is missing the strike plate(I think thats what its called). the entire piece the lock goes into is gone. Do you have this part and if so how much and how long for shipping. Thank you

I don't have any images of the lock in the door. I will be doing a call to you shortly after I send this as I am in Alaska and our time zones are so far apart. Nick

i have a missing keeper plate . the dimension of 82-265 match my lock but not sure what part no would match 82-265