Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

Looking for a replacement threshold. Not sure of make or model of door. Attached are photos.

Can you help me find a new bottom door seal for a very old door (house was built in 1918). The distance between the bottom of the door and the floor is 2.5".

Have two entry doors I need to replace thresholds. Would the 58-189 be the replacement?

Bottom front door sweep

Hi i have an d Stanley entrance door that swings in that i need to replace the door sweep.and the door sil/threshold or just to replace the black rubber seal that goes in the slot on the threshold thank you

We have a 20-years old WeatherShield inswing french door that I needs a replacement staple-on sweep. I believe it is an extrusion #5032. It is for a door 1-3/4" thick and the gap appears to be 1/2 - 5/8". Is there a suitable replacement for this item?

Looking for this weather stripping. Door may be Pella, Hurd or Eagle. 1 1/2 " wide. 36 long. Can you help? Ken

Need a new door bottom/sweep for an in-swing patio door. The glass is marked "insulshield", which makes us think it's a Pella door, but there are no identifying marks otherwise. It's two French doors, one fixed, the other in-swinging. The door measures 1-7/8" in thickness. The existing piece app ... (cont.)

Hello I have 2 Stanley exterior doors No 98030-05-01 30 1/2 inches Which replacement sweep would I need? Thank you

i have (2) 1980's pella french doors which i need to replace the weather stripping. attached is photos. do you have a rplc part for this? also i would like the color to be preferably white or beige and not the dark brown i have shown you. the doors are getting painted white and i would the color to ... (cont.)

Need weather stripping for Atrium door. French door with stationary window on each side. Glass size 25 14/16 by 66. Door is 31 13/16 by 77 14/16. Glass marking ANSI 297.1.1984

Is the 36" Duo-durometer door sweep rubber or vinyl?

I have this rubber piece that slides into the bottom of my storm door. It's 3/4 of an in wide, then the height of the 3 ribs are 1/2 in tall do you have anything that mite work. It just slides into the track. It was and Emco storm door.

Need to replace this weatherstrip piece on the bottom of 4 doors, but I cannot find anything like it. Can you help?

Hi, I'm looking for the bottom weatherstrip to go on the steel garage/home entry door in my home. As you can see, the left side is rather chewed up from many years of use, and should match the right side as far as shape of the enclosed area. It slides into the bottom of the door. ... (cont.)

All rubber, 36" wide x 3/4" tall x 1/8" thick ( the "T" at the top, which inserts into slot, also pictured)...My problem is that the one I have is only 9/16" tall, which lets bugs in, a PLENTY!

I have 2 sets of patio doors that need new bottom seals. I am not sure of the brand or model. Possibly Peachtree. Year ~2000. What is unique about these doors/seals is the piece of wood protruding at the bottom of each door around the seal. Shown in picture. Do you have any seal I could use on t ... (cont.)

waetherstripping is from (white primed) 6 panel colonist HC doors from Jeld Wen

I'm trying to locate replacement Pella weather strip and door sweep for three patio doors. The measurements appear to be 5/8 (but have been compressed over the years. The house was built around 2000 if that helps.

Can the 36" door bottom (58-176) be cut to fit a 34" door? Is this threshold good for an exterior patio french door? What is the highest gap that will fit the seeps on this door bottom?