Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

Looking for a 34? door bottom for a 1990 vetter swinging patio door. Also need a roller for the same door?s screen.

I purchased this home in 1991 - there are no indications of the manufacturer on the door but the windows are Kolby and Kolby. The door are missing the shoe weatherstripping in the picture. The picture only shows the metal frame but I assume there was at one time a rubber insert

I am looking for a door sweep that will fit under a standard size front door(36 inches long and 1 3/4 inches wide). I have attached 2 pictures of the old sweep i removed and a picture of the bottom of the door. The space between the 2 ridges that keep it in place measures approximately 1 1/4 inche ... (cont.)

I have ~25 year old oak double front doors and some of the original foam weatherstripping in the middle (astragal??) has deteriorated badly. I can see daylight and feel wind through the bottom half of the door, and also along the bottom threshold of the door. I was able to peel away a small s ... (cont.)

The Pella part number is 112-003P. The dimensions are 36" long, 1.75 inches wide. It is a kerf style mount with the spacing between the kerfs being 0.75" (inside to inside). I realize the most kerf style mounts are 7/8" spacing (inside to inside), which is why I am contacting your company. ... (cont.)

I don't see any thing in your web sight that looks like this It simply slides in a grove at the bottom of the door . This is a metal door between the garage in the house. The track at the slides into is actually the metal skin on the door that has bent under the door. Any help would be greatly ap ... (cont.)

Looking for replacement sweep Assy or seal. Seal slides on metal tracked that I believe is screwed to bottom of door.

Having a hard time finding this, was referred to you

Help us find this threshold . we already removed from door.

Weather stripping for bottom of front exterior door. Can't find manufacturer but this number is on the door - F31007332432. Door was installed in 1994. 36 inches wide

This is like md door sweep part # 5329818 / 67967. It is 42mm wide (1 5/8) 97mm (35 3/4) long. The ribs that go in the groves in the door bottom are approx 30 mm apart. I can not find any markings at all on the part.

Hi, we have (3) 3ft doors with (2) sweeps on each door that have been torn up during construction. We need to replace them. There is a total of 6 that we will need. They slide into a groove on the bottom of the door. See attached pictures. Please let me know if you need more information. I was wanti ... (cont.)

Good morning,I am looking to replace a Canadian Window and Doors 2004 vintage 36 inch door sweep for a 1.75" clad door. Can you find a similar sweep that will work?Thanks Glenn

Guardian (Taylor door) steel door, 36" wide. Need a bottom sweep replacement.

Possibly a weathershield door from early 1990's. Photo attached. Found some weathershield part numbers... they do not stock this any longer.Configuration C750769, 60-4714Thanks,Keith

I haven't been able to locate a replacement for the bottom seal of my exterior kitchen door. I think the door may be made by Pella. It was installed as part of a remodel in 2008. The photo is the edge-on view. Any idea where I can get one? The door is 36" wide, and is a fiberglass clad wooden d ... (cont.)

Hello,We need to replace door sweeps for all the external doors. Can you help me obtaining the same? I have attached pictures. We just need the rubber/vinyl (second pic) inserts. Please let me know how much will it cost.Regards Jagdish

Hi, Looking for a bottom door sweep triple spline for my screen door. It's .75" wide, .5" high and 35" long. It slides into the bottom "u" shaped cover that goes on to the bottom of the door. Thanks! David

The bottom sweep has come off and broken, looking for a replacement. Thank you for your time

0D0K0033. TFH 36 door sweep. Pella French Doors. 3 sets (2 doors each). Part number please