Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

Hi. We need the following items: 1. Sweeps for the master and slave. See edge profile pic attached. The master is 35.75" wide. The slave is the same 35.75" wide plus a .75" trim piece [which houses the astragal], so the slave becomes 36.5" wide. 2. All weather-stripping to include: A. One piec ... (cont.)

Weather stripping at bottom of door coming tearing off. Need replacement part to stripping on bottom of door. Tag on inside of door: NAMI 5396 NFRC 100/200 Series Steel w/c Door NFRC JEL - 51-2 O1-M

For exterior doors, in sweep, snaps in tracks under door frame. Need 8 of them. 30 inches long each.

Looking for a replacement door sweep for a steel exterior Pella door. Double kerfs 5/8 inch apart, sweep length 34.5 inches. I've attached photos of the old sweep and of the Pella entry system number which is located on the upper hinge of the door.Thanks for any help you can provide. --Vince ... (cont.)

Hi, I'm looking for a door sweep insert. Can yo assist with identification? Thanks!

Can you help me id this lower door sweep,please. If you have a replacement? thank you

I have a french door that needs a new door sweep. Cant find any markings on door. This is tacked on the bottom of the door. Where may I get a replacement for it or suggestions of what to do ? It is an exterior door.

41" long 1 3/4 " wide Need bronze colored bottom of door sweep

I need to replace the door sweep for my Pella french door, right hand side. I can not locate the model number anywhere but I've been told by Pella that the french door was manufactured in 2008.

I am looking for bottom sweep style weather stripping for our solid wood front doors - please see pictures attached. They are French style doors so I will need for both

Both doors are entryway Pella doors. Both need new bottom sweeping. What kind do I purchase?

i need to replace the weather stripping on 5 doors all 36" wide and 1 3/4 thick. I believe the doors are masonite but not sure. See photos. The door shown is one door of a pair opening onto a deck. Thanks Richard

We need the weather strip that goes around the door and attached to the bottom of the door

The attached photos show the bottom weatherstrip for a Stanley door that is about 50 years old.Can you identify and supply the part?Thanks,David

Trying to find a replacement for this swinging patio door. Not sure of the manufacturer.

Hello! We just moved in to our new home and noticed there's a significant gap beer our front door. An amazing associate at Lowe's pointed us in the direction of Swisco.com if the weather stripping at Lowe's didn't work. Here we are, lol. There's no identifying features to the door. We replaced the O ... (cont.)

please help me find a replacement door bottom for my 20 year old Milgard French doors.Thanks Brian

The weatherstrip appears to be nailed and or glued to the bottom of the door. there is no trackway or groove to allow you to slide the weatherstrip on. Looks like I would have to tear off the existing strip and make the surface flat. There are no mfgrs identification on the door other than Guardian ... (cont.)

We are trying to find a replacement slide on door sweep for the metal door going From our kitchen to the garage. The house was built and door installed in 1993. Thank you.

Hello, I need some help in identifying the correct threshold replacement. There are six doors with the same seal or threshold. The doors are wood with metal clad outer facings. I do not know how to remove them to get a better picture so, if you can help me with removal instructions, I'll be happy ... (cont.)