Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

this is a threshold on a set of double doors out to a patio in a 1975 condo. I cant tell if there is supposed to be an insert for this threshold. There is an groove on each side (only one side shown) but the groove on the outer side is not as wide as the inside facing groove. Any ideas? Need to do ... (cont.)

The door seal at the opposite end is torn and I want to replace it. The bottom seal assembly is screwed to the door. Overall door width is 31 11/16 inches. I cannot determine the manufacturer. I am located in Pennsylvania just north of Pittsburgh.

I need door seals for a caradco door , and bottom sweep! Hope you can help

Hello, we are looking for replacement sweeps for our Benchmark double door steel front doors. The doors are 32 inches by 1 and 3/4 inches. The sweep is 31 and 3/4 inches long by 1 and 3/4 inches wide. I

Hi, Thanks in advance. looking for exact replacement for the ones shown in pic

Missing weather strip. 36". Picture shows bottom of door. There is kerf on the left side (not sure if it is necessary)

Hello, Can you tell me if you sell a substitute for a Stanley door sweep? Apparently Stanley doesn't make doors any longer and we are having the same problem everyone else has had finding replacement sweeps. Thank you!

Hello, Do you carry, or do you know where to find, the type of door sweep shown on the attached photographs? The door is a steel door. Thanks.

This is a terrible sample, but it's the best I could do. In the photo, the part facing up attaches to the bottom of the door. The portion facing down is missing pieces that form the door sweep. The distance between the two prongs that hold the door bottom to the door is 5/8". The distance to the ... (cont.)

Hope you can provide info so I can order correct part. I have a metal exterior front Stanley #28915 door with wood bottom to attach sweep. Swri # is 98038-05-01. Size is 36" wide x 1/34 " thick. See attached photos , thanking you in advance for your help on this.

I have 6 pairs of French doors that have the attached weatherstrip. I do know the door manufacturer. The width is 1 3/4 inch, the single centered kerf is 1/2 inch high and there are four thin flexible rubber fins across the length of the unit. The plastic bottom is 1/16 inch thick. I need 36" le ... (cont.)

I am trying to replace the rubber strip that abuts the door threshold. My door is metal exterior door. It is 32 inches wide. It is 1 3/4 deep. Please see photos. I am very reluctant to remove the part because it is so deteriorated I won't be able to reinstall it. Thanks so much.

It has 2 screws on either end, I removed the screws but was unable to get the seal out. I didn't force it to hard in fear I would reck something. Wasn't sure if this was the seal or if a seal fits into this.

Looking for a replacement for this

Help! I need a 77" weatherstrip for a Cardco patio door circa 95?. Also a 3' door sweep for what may be a Pease door. I don't see either on your website but I'm hopeful I missed them or that you can suggest a substitute. LOVE YOUR SITE!!

Hi ... I see so many advertised door sweeps but I don't understand what makes a good, better and best version. What features make the best: - number of fins? - fins vs bulbs? fins combined with bulbs? - brush type vs bulb/fin type? - relationship (shape)or contact to threshold? - stiff ... (cont.)

This is a Caradco bottom sweep that I need to replace. The bottom fins have completely disintegrated. The door is 1 3/4 inches thick, 36 inches long. Kerf space is 1 1/4 inch.

We are having a hard time locating weather stripping that is pictured. It is for EXTERIOR DOOR BOTTOM WEATHER STRIPPING. We need 40" long.

Could you please recommend a door sweep for this 36" wide metal entry door? I believe this is the original door from the mid 70's, so it doesn't have to be exactly the same, just looking for an effective solution. Thank you!

Door is from 1988 era looking for bottom weather strip