Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

Hope you can provide info so I can order correct part. I have a metal exterior front Stanley #28915 door with wood bottom to attach sweep. Swri # is 98038-05-01. Size is 36" wide x 1/34 " thick. See attached photos , thanking you in advance for your help on this.

I have 6 pairs of French doors that have the attached weatherstrip. I do know the door manufacturer. The width is 1 3/4 inch, the single centered kerf is 1/2 inch high and there are four thin flexible rubber fins across the length of the unit. The plastic bottom is 1/16 inch thick. I need 36" le ... (cont.)

I am trying to replace the rubber strip that abuts the door threshold. My door is metal exterior door. It is 32 inches wide. It is 1 3/4 deep. Please see photos. I am very reluctant to remove the part because it is so deteriorated I won't be able to reinstall it. Thanks so much.

It has 2 screws on either end, I removed the screws but was unable to get the seal out. I didn't force it to hard in fear I would reck something. Wasn't sure if this was the seal or if a seal fits into this.

Looking for a replacement for this

Help! I need a 77" weatherstrip for a Cardco patio door circa 95?. Also a 3' door sweep for what may be a Pease door. I don't see either on your website but I'm hopeful I missed them or that you can suggest a substitute. LOVE YOUR SITE!!

Hi ... I see so many advertised door sweeps but I don't understand what makes a good, better and best version. What features make the best: - number of fins? - fins vs bulbs? fins combined with bulbs? - brush type vs bulb/fin type? - relationship (shape)or contact to threshold? - stiff ... (cont.)

This is a Caradco bottom sweep that I need to replace. The bottom fins have completely disintegrated. The door is 1 3/4 inches thick, 36 inches long. Kerf space is 1 1/4 inch.

We are having a hard time locating weather stripping that is pictured. It is for EXTERIOR DOOR BOTTOM WEATHER STRIPPING. We need 40" long.

Could you please recommend a door sweep for this 36" wide metal entry door? I believe this is the original door from the mid 70's, so it doesn't have to be exactly the same, just looking for an effective solution. Thank you!

Door is from 1988 era looking for bottom weather strip

the door is a part # 400clm it's a wood core steel door. this is a picture of the bottom sweep it's 1 3/4" wide the closed sweep is the inside part of the weather strip this is a stick on sweep there is no track on the bottom of the door that is slides in to. it's a 36" door. Please help winter is ... (cont.)

Hi, This came out of the threshold for a Wenco-83 French door. I'm trying to track down a replacement part if possible. Thanks! Steve

I am looking for this prime door sweep with tabs. I can't use something like 58-186 as a replacement because I have kick plates on the door. Do you have any suggestions?

My customer requires a replacement entry door bottom seal. I attempted to use 58-189 but it would not work. The center tabs on the bad seal two attaching tabs are spread apart slightly more than on 58-189 and they are a little higher and they had an angled edge on the outside top that hooked on the ... (cont.)

Hello Swisco, looking to replace the bottom rubber sealer underneath my front entry door hard to find do you have anything similar to this? The old piece had 2 holes cut into it to be able to secure in place. The old piece base was approx 3/4" and fit into a hollow u shaped channel in the bottom o ... (cont.)

all my doors are steel. there are NO labels on any doors. i assume they were purchased at lowes or HD, as there aren't many options where i live. i don't believe the 58-189 would fit. Any thoughts? also, i purchased a sweep (58-176) that i thought might work, but must return it, as it wasn't clo ... (cont.)

It looks like a Stanley 840098, but I am not sure. Hopefully this .jpg came thru and you can identify it. It is 1-3/4 inches wide, 36 inches long It has 2 fins - 1 on the outer edge, 1 in the middle and 2 tubular shaped seals

I am looking to replace the door sweep on my Stanley Door. Please help identify a correct replacement. Thank you

For door 595830 Is this deep enough?