Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

The doorsweep vinyl is worn and i would like to replace. The vinyl sweep slides into and aluminum track, see pictures. I have looked at both Lowe's and Home Depot and they do not have this type. I see no part numbers or manufactures. Can anyone help me with a replacement sweep?

For part 54-176 is the sweep installed with the screws on the outside of the door or the inside?

I have Caradco swinging doors (one side)that lead to outside spaces. I need replacement weather seals. When I look under door it appears there are three rows of seals. The doors were installed when the house was built in the 1999-2000 time frame.

need replacement weather strip for bottom of door and door jamb printed on dual pane glass TEMPERED 16CFR 1201-CII ANSI Z97.1-1984 1/8U SGCC-1702 AFG S142 8S6206A DOOR IS 34"W x 1.75" THICK

Hurd entry door. Door is metal clad. 1 3/4" thick. Weather strip was stapled in place. Inside edge goes around the dooe edge 3/8". The stripp has a bubble on the inside edge. A fin in the middle. And the outside edge appears to have had a bubble. I will attach pictures. Ron

Hello. I am looking for Three Seals. 1) The seal along the Door Jambs 2) The Seal along the verticale door strike 3) The sFlat link neal under the door on the Thresshold

The attached photos show an end view of weatherstripping at the bottom of an exterior door. The rubber tore off on one side so I want to replace the piece. I can't find the make of the door. The short piece on the right of photo Weatherstripping1 fits into a slot in the bottom of the door; the other ... (cont.)

Emco Forever door A-387594, I think I found the spline, part # 55-109. Can you help with this goofy floor sweep at the bottom of the door? Thanks Bob

Good morning. I have a Caradco French Manor Door (Active and Passive) and the Manor Door (2 each) that I need to replace the door sweep on. Would you happen to know if you have a replacement for this door sweep? Thanks, Randall