Viewing all customer Discussions for:

26-106 Narrow Vent Latch

I need a couple of vent locks for a vinyl window. The slot is 1/4" W x 1" L. The photo shows the current one. The piece is broken at the bottom. I do not need an exact match. I can use a substitute as long as it works. I can file the hole to make it a little bigger if needed. You were recom ... (cont.)

Hi I am looking night lock for Patriot windows please see the attached photo and let me know if you carry these and how much they are. I need 10-15 of them.

Need your help on this looks like 26-338 might fit

Not sure if that the correct name for this part. I just ordered and installed pivot shoe 15-046 for my double hung tilt in windows. The face is about 1 1/8" long and about 1/4" wide, picture is a side view. From the side view the bottom/widest part is 7/8". Can you let me know the part number? Tha ... (cont.)

I need vent locks if you have them. They are 1 1/4 height and 1/4 wide. Please let me know if you have them. Thank you in advance. I hpe the pictures are clear enough.

I always called it a flip lock, so you could safely leave your window cracked open at night on when you are out. It has a number on it in a circle C-86 with a 5 underneath

Any help identifying this, I believe it is a window sash lock or maybe a vent. My house was built in 1998 in Fredericksburg Virginia, no identyfing mark on windows. A lot of these are broken off and allowing air to come in the window. Believe the piece to be 1 3/4 long by 5/16 (outside measurem ... (cont.)

I have season all aluminum double hung pull out windows , I need parts for the sash locks and other parts , do you stock them ?

Hi - I've figured out that I need a couple of 23" Series 350 Channel Balances (with the included shoe and top), but I don't see a stamp option anywhere on the old balances indicating the sash weight range. If I simply weigh the sash itself will that work for figuring out the range? Thanks ... (cont.)

I am looking for pop up vent latches for what I beleive were Dove double hung windowa installed in the late 80's early 90's?? You have a similar one (26-107) which is close but not quite the dimensions I need. Do you have any other ones like that one? Thanks for your help. Howard ... (cont.)

Customer care, I need about 20 vent latches Length 3/4 inch Width 1/4? Please advise

Hi, none of the windows are marked with a brand or any other markings. 1 and 1/16th inch tall and 4/16th wide opening the part goes in to on the window frame. Do you have any parts that will work? Thanks, Jenn

We had our windows installed about 20 years ago. When we had them done, the installer gave us a bunch of extra of these safety locks because he said they can break easily if not pushed in before opening the window. Well, over 20 years and several kids, we have gone thru all of the replacements and ... (cont.)

Im trying to find the right sized part to fit in these vinyl sashes. I've attached photos showing the empty one inch space and another from a window that still has one in it.

My sash stops on some of my tilt vinyl windows are starting to break. I have no idea who the manufacture is. The opening they came out if is 3/16 wide and 1 1/16 tall. The actual stop is broken so I'm not sure of the size. I'm including pictures. Any help you could give me for a replacement woul ... (cont.)

I am looking for the security clips to replace on my windows. SWISCO Double Hung

I need a vent lock or a sash stop. Its similar to the picture from a homeowner in Connecticut on 7/19/2010. The 26-106 was recommended. the item I have on my 1992 silverline vinyl windows is called a sash stop I believe. I'm not sure which item to purchase the 26-106 or the 26-338. Can you advise me ... (cont.)

I need to buy 20 of these for an opening that is 1" long and 1/4 in wide ? Any suggestions?

Replacement window safety latch for vinyl windows 1 1/4" long

Do u know where I can get these limit locks?