Viewing all customer Discussions for:

81-265 Plastic Roller Assembly, Likit

Plesae help me located this replacement roller.

Brand Unknown, can't find anywhere, do these still exist or is there a replacement.

Sliding Likit Door (see patent number and pictures) about 27 years old would like replace rollers and maybe Door Handle (no outside key lock). Is Surface Mount Door Handle 82-0005 going work dimensions are 4 15/16 screw measurements long and 8.5 handle. Is 81-265 replacement Roller Assembly going t ... (cont.)

Hi, I have a broken sliding door roller and I am looking for a replacement. I understand this may be an old model. Hope can get your advice whether you have any similar items i can fix for my door. Thank you.

I have a broken plastic wheel on my glass sliding patio door and it looks similar to your 81-265. There are no screws or attachments to undo to remove this, and it looks like it should snap out.... but the bottom channel looks like it has been crimped at the factory to maybe keep this in place. Are ... (cont.)

It's an aluminum screen door that tracks outside a large sliding glass door. Installed in 1970. There are no markings anywhere on the screen or sliding door indicating the manufacturer or part number. As you can see from the pictures, on the right is a spring clip that goes inside the bottom scre ... (cont.)

The doors were installed circa 1958. They are 1.75" x 2" x .75" with no adjustment hardware.

Hi, I am inquiring about this product for a customer. They told me that the store that had these rollers closed down, and they said that your company SWISCO manufactures these rollers, so I am checking to see if SWISCO has them in stock. Thank you.

I also found these rollers on this site. My question is how to remove and replace them.There is one screw on each corner of door frame (4) total. Do I need to take frame apart to slide them in or do they pop in with a little persuasion from a hammer?

Likit Hayward, CA Door Pat #3.106.753 We are looking for replacement rollers. There are two gray plastic rollers under the heavy glass door, one which broke. Can you please identify the best replacement roller for this type of door? Thank you so much!

Hi, My sliding patio door stopped closing properly. I replaced the roller assembly on both sides of the door even though the rollers seemed to be fine. However, the door is still misaligned. What is my next step? Here is the part description: 13180 - Roller Assembly, 1-5/16", Plastic, Concave, ... (cont.)

Hi! I have an older aluminum sliding glass door (no markings that I could find), and the rollers are all plastic including their housing. They are both completely destroyed and I cant seem to find replacements. The door has a female track in the lower extrusion that the roller housing slides into ... (cont.)

My door fits a roller like Swisco's 81-265. Do you have a version with steel wheels? Or can I retrofit a steel wheel into it?

I have a broken wheel from 70's patio sliding door that needs replacement. I like to find out if you carry them and if so, should I replace both? Also do you have a DIY instructions? Thanks, Tony

Looking to replace a roller for my sliding glass patio door. I've measured the roller with 1-5/16" diameter, 7/16" width, and 3/8" hole diameter. I've had some trouble locating a replacement matching these exact specs, trying to use one that is similar but not quite the same in specs just doesn't ... (cont.)

Hi, I replaced three Swisco plastic rollers part # 81-265. After re-installing the patio glass door, one side is slightly higher than the other and it's difficult to lock the door now. There are no adjustment screws. What can I do to make the door balanced? Thanks, Tom

Need wheels for a herculite patio door ppg herculite k Date code 1966

I have 3 sliding glass doors manufactured by Likit, which went out of business. The rollers are shot. How do I ID the correct roller for these doors? Or do I replace the entire 4 foot roller assembly? Do you know how many rollers these doors have top and bottom? Thank you. Kelley ... (cont.)