Viewing all customer Discussions for:

39-388 Split-Arm Operator, Wright

Gear to open and close window non functional. The drive shaft is extended out. And not engaging. Two Attached pictures. First is tag on upper inside of opened window casement. The second shows window in open position. The bracket is attached to the window with two screws, and is part of the cra ... (cont.)

Hello, hoping you can identify this window crank. I would need several rights and several lefts. Preferably the same color but does not have to be.

looking for replacements for old Hurd window sill mounted operators. model 55101 and 55100, gold in color.4 3/8" arm and 3 1/2".

I need to Replace these Split arm window operators I'll need 9 Right hand and 6 left hand along with 15 handles. Do you have compatible replacement parts guaranteed to fit. I found part numbers which are 39-317 39-318 and 39-114L for handles will these be the rite ones to replace mine I have shown. ... (cont.)

All of my windows have "play" in them when the are open. The crank will move at least a half a turn before the window moves. I believe I need to replace the full crank hardware. I think I need your 39-387 & 39-388 parts. Could you please confirm for me. I have a total of 17 white I need and 2 b ... (cont.)

Hi I have these incasement windows. I like to find out if you have these or equivalents that I can use to replace couple of them that needs Replacment . Any advice will be appreciate it . Looking forward to your comments . Tks Alex

can you advise which part i need to purchase in order to replace this one

Looking for 3 left hand operators. 7702 is on the back of this one. I think I need the 7701 operator? Do you have this color? Thanks, Annette

Looking for replacement parts if you have any

Hurd casement, gear mechanism stripped. Need replacement

thank you for your help. Our home was built in 1989 and has HURD wood windows. The windows are still intact and I am trying to replace the operating part that no longer is working. Can you help me? I see the number 007900 on the arm. Please let me know if you have a part that will work. thank ... (cont.)

Do you have cranks by Wright #07900 for Hurd older casement window. I need one right and one left.

Need this part pls

I took the pictures from the side that was working (left side from the outside). The worm gear is stripped on the one I need and I didn't want to open again just to get pictures.

I am looking for a left and right replacement for the attached wright window cranks.

I'm looking to find a locking lever and the replacement parts to open slider arms crank etcasement window. Del Mar Toronto. White

I need a replacement part For the bottom Outside window bar that is straigh and on the left side of window, with bracket on the outside window sill.. Also looking for a right side window crank. Windows were installed 1995 by Garner windows.

Good Day, Looking to replace window crank. The crank is for a bedroom window that opens to the right...4 inch base. One of the arms has the numbers 07900 stamped in it.

Hello - I have some older HURD casement windows in my house and need to replace the window cranks on left and right opening windows. It looks there is a possible model # 07900 stamped in it. Hopefully you can help me out on what I might need to order to replace these. Thanks and have a good day ... (cont.)

Hello, We are a custom glass installation company near Aspen CO. We were looking on line, it seems as though these old ones have been replaced by a more rounded profile, and you only offer the body in white??? (we think we need part #39-318) We will be needing 8 units that are a bronze (4L & 4R) an ... (cont.)