Viewing all customer Discussions for:

39-388 Split-Arm Operator, Wright

Window cranks need to be replaced 07900 is on the arm

I found the numbers 07900 atamped into the arm, windows are old wood casement windows, cant find a manufacturers name on parts or frame. Theres a plastic guide that slots into the track and is screwed into the bottom of the actual window is whats broken. Hope you guys can help, thanks,Jason ... (cont.)

Hi Just moved into a new place. No truth distributors in area. Trying to make sure I order the correct item to replace. Glad I found a site to order this from Any info on what to get would be appreciated. Looking for right and left window replacements Thanks Brian

Looking for some parts

Wright replacement cranks needed right and left, old ones rusted not working . Cranks and operator needed. Not sure about correct one to order.

Hurd casement windows Need right and left split arm Installed 1995 Goldtone hardware Window size 23 x 35 From the base to where the right angle arm attaches is 4 inches the small arm piece that attaches with the sliding clip from the stud to hole is 3 1/2 inches 7702 imprinted on bottom ... (cont.)

I am told these are Vinyline windows. The crank mechanisms are shot. Are replacements available? Thank you.

I see that you guys have suggested some parts for people with other similar products from Wright. Just wondering any advice you might have on replacing the Wright 7708. Any help appreciated, thanks!

This is bent and broken on the opposite window. It cant be opened. Need these parts but for one that opens opposite direction. Thanks

I ordered parts to repair a 7500 series window, which I received. However, the operator arms are not the appropriate size to accommodate the window. I have attached photos in an effort to determine what the correct part is to resolve the issue. The parts received: 39-387 & 39-388 are too short and n ... (cont.)

I would like to order for my American Craftsman casement Windows. It was suggested I attempt to locate a series number and/or take pictures. I have included some photos of the operator arms/hardware. I would like to order 2-left & 2 right operator arms.

I would like to know the cost of 1 set

I need a replacement for both left and right operators.

It is a Bay window where the two end windows crank open but the crank stop working In one of the pictures that I sent you has some Pat numbers on it

I'm looking to replace this operator. The crank out arm measures 9 inches Would you have this in stock and what color options for handle ? Thank you for this service,

Hello, Unfortunately, we don't have an exact match for this operator, but you may be able to substitute with our 39-387 and 39-388. There are just two things to note:1) You will have to reverse the clip at the end of the link arm. This can be done simply by popping it off with a flat-head screwdrive ... (cont.)

Hello. Looking for operators and weatherstripping for delmar hardware casement windows Thank you Mark

Hello. Only tag on window says DELMAR HARDWARE. I need new operators, latches I saw from another poster and the weatherstripping. The operator that is original says wright. The operator I made from a big box store says truth. Thanks for your time and expertise. Have a blessed dayMark R. ... (cont.)

Hurd 1GCC CBAWindow crank on left. Stripped gear. Also, another one won't close all the way, leaves one inch. Thank you! Pam

Looking for replacements for Truth 45251 window cranks. The model 39-171 is very close, but the top split arm is 5" long verses 4 3/8" on the 45251. Thanks, Phil