Viewing all customer Discussions for:

39-142 Single Arm Crank Operator, 11"

I am looking for Extra Heavy Duty Crank and Rail to replace the existing crank for steel window which is very old and very stuck. We replaced the original cranks with the ones you see in the photos, however most of them were broken because it is not strong to open heavy window especially when start ... (cont.)

I am trying to find replacement operators to replace several operators that no longer work. The attached pictures are of an original operator. Which side are the hinges on for each hand? I will need both right and left hand operators.The property was built about 1950. The windows are inset in the ... (cont.)

We are doing a large restoration job in VA and will need to replace several, several awning cranks. The attached pics are an example of a typical crank that will be replaced. Please contact me with any questions or if you need more info.

Greetings! Kindly give me an information if you have any manufacturer or suppliers of that window casement crank operator, single arm crank operator. Thank you

The screw holes are 8cm and the arm is 11 inches. There is no manufacturer only a patent number on the base which is 6,247270. Can you suggest a replacement part

Hi, I have a crank assembly that looks almost identical to item 39-142, but with a 13 1/2 inch arm. Do you carry an item like that or know where I can find one?

I tried these folding handles w/covers for my 39-138, 39-141, 39-142 (white) operators. The spline fits but not the cover. Is there a cover or similar folding handle w/cover for these operators?

I know its hard to see from the picture's. When you pick up the operator it is heavy and solid not like the thin die cast. The one in the picture has a 9" arm that will work but 11"arm will be better. We will need 50 left and 50 right and will need one first for approval. Please no delays ... (cont.)

Greetings, I recently purchased two operators (39-022) from your firm but upon receipt found they are not what I need. They are similar in all aspects to my original operators except for the mounting screws; the replacements are mounted from the outside of the frame, while my originals mount f ... (cont.)

I have the same model as the 39-138 and 39-139 but the arm is 1.5" longer (11") instead of 9.5". Do you have the longer or does it really matter? Does the 391xx come in different colors or just the white?

I am trying to purchase 1 39-141 in dark bronze and 1 39-142 in dark bronze 39-142 seems to come only in white and black . These will be installed in the same building can i get right an left in dark bronze the handles come in dark bronze

I don't know who the manufacturer is. The hole pattern matches the 39044 configuration, but the arm is 11" long. The number "40067" is stamped on the arm. The operator has threaded holes and is mounted from the backside (window frame has through holes). The channel guide resembles 39504 and ... (cont.)

Hello- The measurements for this part - shaft is 12" long - the width of the black part is 5 1/2". I hope you can help me. All that is says on it is Made in USA (it must be old)

Attached is the hardware we are looking for. Please let me know if you can tell what type it is. JOHN, Service Manager