Viewing all customer Discussions for:

81-266 1-1/4" dia Roller And Axle Kit

Screw hole on top, 1-3/8" distant from back edge. Wheels are 1-1/4"

Very old,sliding glass door rollers (2) that fit aluninum frame.

Hi, I would like tu buy 4 rollers and i need to know which rollers will fit. Please see the photo and measurements. Thank you.

This is a tandem roller on a Revere sliding patio door. Door is one of two sliders with 2 solid panels. Unit is 12 ft wide and 8 ft tall. Approximately 12-13 years old. Tandem wheel unit looks like your 81-156 model with end adjust. The 81-156 shows to be 1.5" width/tall on the carriage unit wher ... (cont.)

Looking to replace these rollers, are you able to assist?

1 and quarter inch wheel

Hi could anybody help me identify which part I need to order to replace the sliding glass door roller assembly? The roller assembly is in two pieces both made out of aluminum it has a 1 and 1/4 inch steel wheel. Thanks for any help identifying

Patio door rollers Frame length 3 1/16" Frame width 3/4" Frame height 1" and 1 1/4" Wheel Dia 1 1/4" Wheel width 1/4"

Might be a 40 year old door

Need patio doorwall roller need of these

I have a large sliding glass door and my current rollers are very worn and need replacement. The wheels are 1 1/4 in diameter, height is 1 1/8, and width/thickness is about 11/16 inches.See attached pictures and please let me know if you have a suitable replacement roller or need any more informatio ... (cont.)

These are for a Glendale Golden Falcon Park model RV

Roller diameter: 1 1/4" Height: 1 1/4" Length: 1 1/2" Thickness: 13/16" Adjusting screw is on bottom of bracket; screw to secure assembly into door frame is on the top; assembly has dimples on it. Door frame is all aluminum. I believe it is original door; house was built in the 80's. Could not see a ... (cont.)

I am trying to find these rollers for my wood sliding door. I only need 2 of them. Can you help..see attached 2 pics.. Thanks

The wheels I am looking for are Identical to your catalog Item #81-258S Except for the diameter of the steel ball bearing wheel. My Pictured item removed the door measures 1 1/4". My question is, is there an identical item as the 81-258S with an 1 1/4" wheel or will the 81-258S with a 1 1/2" ... (cont.)

This has a 1 inch diameter wheel. I would prefer a replacement with a metal wheel.

Need 2 rollers and one door hardware. Roller box is 1 1/4 inch by 2 1/4 inch. Wheel is 1 1/4 inch across.The RV is a park model manufactured in 1991. The sliding glass door was manufactured by General Aluminum Products, Inc. In Charlotte, Michigan.

Can't find any numbers on door or rollers need new rollers or parts to rebuild and track insert for replacement rollers

Need replacement rollers for Buchmin Industries mirrored closet doors. They are approximately 35 years old. Thank you!

there are no numbers. If you sell them i would like 2 of them.Thank you Tom