Viewing all customer Discussions for:

81-266 1-1/4" dia Roller And Axle Kit

Need to repair or replace this track. There are two sets of rollers...one pictured. They are riveted into the track. No idea which compsny made this.

I've attached pics of a roller assembly, roller and axel from a 1950's 8ft double slider (both sides open & close). There are no markings of any kind. The wheel is 1.25" in dia, .25" wide, and has a center hole of .25". the axle is 11/16". The main body of the assembly is 2 13/16" long and 1 3/8" ta ... (cont.)

It is off of a large aluminum framed door. Markings on the wheel read: Killian - Toronto Can - Syracuse NY The screw boss in the track accepts the little "Y" shaped flare at the top. There are two screws that hold it in place. I'm stumped.

Actual wheel width is 1 1/8" x 1/4 thick ( with ball bearings) 3 1/2" long assembly overall x 1/2" wide Actual chanel is 32" long x 3/4" inside It is a wood sliding patio door. Approx 30 years old. I cannot find a name or any part #. Replacement rollers would be great but even better would b ... (cont.)

Hello: I have worn out rollers that look very close -- assume exactly the same -- as your 81-027. They are riveted in wheels / peened on one end. Attached are pictures including the inside roller part too. Notice that inner part is stamped "D-719." Question #1: Do you sell the wheels wi ... (cont.)

I can't seem to find a 1-1/8" roller and axle kit. ( I found the 1-1/4") My current rollers are riveted directly to the frame of the door, no housing. What should I order for the axle/rivet/nut &bolt. I am looking to replace the rollers (qty. 4) along with the axle (in this case a rivet) on my two ... (cont.)

I ordered the wrong rollers for my patio doors. I've taken pics of what I ordered and what I need. I need the one on the right, with an axle. same size as pn 81-224, but with axle. Can you help me? James

We have sliding glass doors for closets, that are probably from the mid-1970's or early 1980's. The wheels have cracked and we'd like to replace then. I pulled out the wheel and housing and took some pictures. This exact Del Mar wheel is not on your web site but there are several that are very ... (cont.)

i can drill out the old one. do you have a replacement?

My metal sliding door(s)are ~25 years old...the roller assembly looks like the 81-009 Miller but I cannot be sure for I cannot remove the assembly. I did successfully remove the roller (wheel) itself and found that the pin (shaft) appears to be broken. Is there any way to confirm the manufacturer? H ... (cont.)