Viewing all customer Discussions for:

81-266 1-1/4" dia Roller And Axle Kit

I would like the wheel and the axle. I would like to buy four of each. I just replaced the wheel and it worked well, but I have another door.

Hi, I think I have the rollers that look like the 81-092. But my wheels are metal and the ones in your picture are nylon. I have inserted a picture, hopefully you can let me know if I have the wrong roller selected. Thank you, Rob.

I am not a window technician, but it looks like I will need to drive out a pin in the casing/frame to remove this roller. This pin is also the pivot point for the height adjustment. Currently the doors have only 2 rollers per a door, but I am told I can install double rollers in place of the origina ... (cont.)

I believe my very old rollers were made by Ador Hi Lite; see attached photos. I also believe the metal wheels were originally 1 1/4" in diameter--- it's hard to tell. Will your "1-1/4" Dia Roller and Axel Kit ( # 81-266) be what I need to get my heavy, glass sliding door moving again? Thanks, ... (cont.)

The roller is 1 1/4 diameter. The piece with the screws is 2 1/16 x 1 7/16 and 7/8 thick at the area where the screw holes are. The piece with the roller is 1 3/16 x 1 1/16(the part of it that extends beyond the other part)

I am looking for 4 door wall rollers that match these pics or ones that will work in place of these.

I have a 10' sliding door and is heavy. I have had milgard come out and replace both tandem rollers, however, it did not help much. They said they don't use steel rollers. My dimensions are close but not exact to the 81-149 Stainless Steel Sliding Glass Door Tandem Roller (which I ordered and tri ... (cont.)

The rolling wheel in this unit is 1-1/4" diameter, concave (designed to run on a rail) steel with steel ball bearings. The overall length of the unit is 2-3/8". The adjustable component that carries the wheel is 1-3/4" long, 3/4" wide. The housing within which the adjustable component sits is 1-1 ... (cont.)

Hi, My house was built in the early 60's. Attached are 3 different views of the roller assembly. *The metal roller itself had a plastic concave outer piece which has dissintegrated. Can you identify the best replacement part so that I can order some? Thank you Bryan B.

To Whom It May Concern: We are looking for a replacement balcony door wheel. It is 2 3/4" long, 1 1/2" high, 1/2" wide, and the wheel is 1 1/4". Do you have something that would work for us?

Hello, I searched for an answer to my question but did not find it. What should I use to install the rivet which comes with the 81-266 roller kit? This is the 1.25" diameter roller kit for sliding glass patio doors. The rivet needs to be very compact since there is very little room for the formed h ... (cont.)

This is a peachtree door roller purchased around 1973 with a 1 1/4" roller. Please contact me ASAP, thanks, Josh

To Whom Concerned, I'm in need of two roller assembles for a sliding glass door. Below is the information found on the door. Mayfair, Code 17-2, HP-Series, Type & Class SGD-B1-HP, Series 20, Chamberlain MFG. I could not find any replacement parts at any of the box stores, Home Depot or ... (cont.)

1 13/16" length, 1 1/8"height, 9/16" thick, 1 1/4" diameter

Hello, Please let me know if you have the following Patio Door Roller Assembly available. The roller assembly was possibly made in the 60's. Thank You, PC

This is out of a 31 year old slider made by Trimslide, who are out of business. Can you match this up for me? Thanks, Paul

I have an old sliding glass patio door. I think it's from the 1950s or 60s. The wheels are broken. Do you have replacements? Thank you, Ray

I need a replacement for this type of roller which I cannot locate. The roller is nylon 1-1/4" Diameter,5/8" wide housing, 1-1/8" tall and 2-1/4" over all length. Can you Identify or is there a newer version that would work?

could not find any #,s on roller assembly. rollers fit a summit sliding glass door. series # 8670 SGD-R20-96x96. rollers are 1 1/4" O.D. 1/4"wide. they are concave and I think they have 1/4" pin. What do you have that fits , I need 4.

Need to repair or replace this track. There are two sets of rollers...one pictured. They are riveted into the track. No idea which compsny made this.