Viewing all customer Discussions for:

90-278 Lock & Keeper, 2-1/16"

Are these locks plastic? Looking for metal or aluminum replacement locks.

I am looking for a replacement latch assembly for my window. The latch handle broke off when trying to unlock it. The window has a tag on it identifying it as a 52-2905-WHT, STILES 2301 White, 33.813 x 23.250. Thank you!

I am in need of replacement sash locks for these horizontal sliding windows. The lock itself seems to have a R/L and the catch has number 9134. The other part of the lock has the numbers 92 58. We tried replacing it with a slide-co 171915, but the catch on that lock was the wrong size. Everythin ... (cont.)

Back set 9/16 center hole to back. Installation holes center to center 2".

This latch is from a "better built" window installed in the mid 90s. The windows were bought from "Yardbirds" in California I will need 20 latches Thank you. Earl

Hi All: Looking to replace these sash locks. They have take a beating from the elements. Thank you so much in advance for the help.

I have 30 year old Dailey Manufacturing windows. I need either a new sash lock keeper or a complete lock set. They seem the measure 2 1/16 of an inch maybe 2 1/4 inch OC.

Series sierra tilt sh H-LC25-45x77

Is this window latch and keeper made of metal or plastic? Thank you

Hi, One last window latch I'm trying to match and replaced, "Viking". On the latch: 2 1/8" holes on center. 11/16" hole on center off the edge. It is 2 7/8" long and 1" - 1 1/16" wide. I would want to replace the latch base as well. Thank you! Anna

We have four Silverline single hung windows all about nine years old. All have two locks per window and all are broken. We need all replaced but I need to make sure I get the right parts. Please advise what to do.

2. slider 3. single hung, latch has some sort of spring in it? 6. unknown latch but may match one of the other ones I've uploaded 7. this is #3 cleaned up

I have three of these windows, photos show two of them. The window latch and tilt-in latches need to be replaced. There is also some damage to the window frames, wondering if there's a way to fix the vinyl there. Lastly, at least one of them is missing a balancer - is it possible to find a replaceme ... (cont.)

Hi, We'd like to replace 3 slider handles as the are getting tired and chipped.We'd also like to replace at least 8 window latches as they are also getting tired, chipped and/or broken.I hope pictures are helpful!! The slider handle and latches are about 25 years, a part of the original house constr ... (cont.)

Screw holds 2 inch spread

Hello, I'm looking for a set of balancers for a Wasco 28 3/4 x 45 1/2 window. The window sticker shows below info.:Warranty Info: 123-649402PO: 237109/18/0728 3/4 x 45 1/2Best regards, Yui

Do you have a replacement for the attached window sash lock? It is 2 1/16 inches between screw holes on each sash, 1 1/16 inches between screw holes on different sashes, screw holes on the keeper is 6/16 from edge between sashes, and the screw holes on the lock is 11/16 from the edge between sashes ... (cont.)

broken empire pacific series 5200 window latch (tip broke off of interior hook)- installed in 2006 Just need one.

Do you carry sash window locks like the one on the left? I have some to replace and can't find ones like this. The gray one was installed when the house was built but that was only 25 years ago, not old enough for the older cam-style locks. I have purchased from you a set of the white lock on th ... (cont.)

Hello. Do you have one of these in stock. I'm sorry, I can't see any manufacturer name or part number. The strike is slightly lower than the lock. Thanks for your help. Bob