Viewing all customer Discussions for:

90-281 Flush Mount Lock, 1-11/16"

Hello - I am trying to find a replacement lock / keeper set for a Jeld-Wen window. They are recessed and flush mounted into the window sashes. The lock has the numbers 45202 and 45204 on it and the keeper has the number 41276 on one end. Are these SWISSCO parts? If so how can I order replacement ... (cont.)

I don't have a description but The measurements 2" L 1" W

Can you provide 2 replacement locks to match the photo?

I found you have #90-281 that is very close to my size in my Hurd window. The difference is that mine is not fastened from the top. Instead, it is fastened from the side (like #90-320). I assume that #90-281 will work - or do you know why it would not? I found a discussion under #90-320 referencing ... (cont.)

we need the keepers as per the 1 st photo, the second photo is for referece

Looking for the keeper for Flush Mount Lock, 1-11/16" Product Code: 90-281 Best, Yraklis

We moved in and this window was missing a lock.

Milgard does not seem to be able to come up with the window (double hung) latch I need. Are you familiar with this latch? It has no screws to attach it to the frame. It appears to be held on with some kind of tiny spring that has snapped off.Thanks,Linda

Looking for replacement lock for window. Measures 2.375" wide, 1" deep and 15/16ths tall from top of knob to bottom of lock. Unsure of brand of windows, but the are original windows of house that's 28 yrs old. Lock has the alpha/numeric A-S PA. and 9778 on it.

Truth 45041. I would like to replace with white or bronze

I need to replace several window locks. Tenata unscrewed them and removed on several widowns about 2.5 inch long semi roud see pic added below of existing. Rather novice to this but both sides are missing

Looking for two of 45204 for window. We've been in this house for 15 years.

I need one of these locks, pretty much regardless of cost.

Please let me know if you have this part available. Thank you.

I am trying to locate a replacement window sash lock for a window manufactured by MI Windows and Doors. The stick on the window frame provides the following numbers:26738796.2 and an additional number of 1650. Please let me know if you are able to help me find this part. Thank you.Steve ... (cont.)

Im looking for the keeper for the lock on a Hurd doible hung wooden window. See photo of missing and present keeper.

Attached please find pictures for replacement parts Crestline window. These windows were original in the home built in 1993. The locks move, the mechanism slides back to the open position and need to be replaced.

2 1/16 wide. With 11/16 hole set back for face mount latch.

I need replacement parts for a uniframe window company. I am working on two windows. Both need replacement window tilt latches and both also need the parts at the end of the strings

I do not have the parts number for this window lock. Hope you can help me with the little information I have. Thanks Carol