Viewing all customer Discussions for:

39-393 Roto Vinyl Awning Window Operator

I have a few broken pieces: 1) Photo with yellow circle: latch mechanism is broken off on other side (this is a photo of the side that still has the piece for reference) Photo with red and blue arrows: 2) Silver bracket is broken and needs replaced 3) black plastic piece on hinge that connects ... (cont.)

The frame side is a up-down sliding rod.

Number of Inside crank OP06-7542-08 Don't stay clipped to bottom of window. Can I just get the clips or do I need to replace the whole assembly? If so how much is the part.

I need the window bracket and clips for 3 Weathershield awning windows. The scissor type push rods are intact, but need the L-shaped bracket that attaches to the window frame with the rotating hinge posts on the bottom and the clips.Also need one casement window crank arm with the hand crank and el ... (cont.)

I'm looking for the left locking mechanism for this window not sure who makes it. The right one works fine the left someone forced and totally bent the mechanism.

Do need the complete assemble to be replace or you sell the stub

Can you ship 1-part # 39-393 in tan or almond with handle and 1-39-340 Thank you

one of the black tabs broke off from the crank out

I like to know if fits in my window?

I'm seeking a clip that would connect with Product Code: 39-393 Roto Vinyl Awning Window Operator and Product Code: 39-340 Roto Awning Bracket, Surface Mount.

Need help identifying this part so I can order a replacement. I have 2 side-by-side windows with broken cranks.

I have an American Craftsman garden awning window. The crank arm and pin needs to be replaced along with the locking mechanisms.

Hello, attached are photos of the crank on my awning window. The handle keeps falling off as there is no set screw to tighten. At full extension the arms are 12"and the interior cover is 4 5/8 ".

In first photo the black connector with the two posts broke. Second photo shows undamaged unit. It mounts on the bottom of awning window and connects to window crank. I need 10.

The handle is stripped out on this unit and I need to replace it. The inside of handle is stamped "OP05-1509

Thanks Lou

Hi, I need help with finding / purchasing replacement parts for an unknown brand "Garden Window". The casement track connectors are broken. The dual arm assembly works fine but connectors at the end of the arm are shattered. The connectors have ROLO OP05 1007 on the parts. Might you have a replaceme ... (cont.)

I need a qty. of 2 if these items.These are for the connection points on Awning operators I am sure you know what I need as you have gotten all other parts I have needed 100 % Thanks Chuck

The model of this window crank is 39-393 Roto Vinyl Awning Window Operator : SWISCO? But it looks like you may have a different model. Please advise if you have the replacement for this one. Thank you!! Judy

I have not been able to locate the window mfg. however attached are pictures of the 2 types of operators I need.The sissor typpe I need approx. 5 and only 1 of the single arm type. Let me know if it is something you could locate / supply.Thanks Chuck