Viewing all customer Discussions for:

26-154 Sash Release Lever

I need two windows lock shoes, two windows pivot bars and two tilt latches, for left and right side. Thanks

There are no markings on the windows to identify the manufacturer. The exposed rectangular part is 2" long and 5/8" wide.

Looking for the vinyl tilt latches and metal pivot pins. Pivot pin has a unique shape and patent pend #1440-1

The plastic slides at the top of the lower one of a double hung window that you move to allow you to pull down the window to remove it snaps into the opening in the window that releases it. Both of mine have broken in the process of removing them to replace other parts. The were installed 20 years a ... (cont.)

Any chance this part can be replaced on this builder installed Kohltec double hung window? It is what stops the window from falling down when it is opened from the bottom. Thank you for your help - Denise, Scarborough, Maine

The part I need is the piece you slide to disengage the top of the sash from the frame so you can tilt the sash for cleaning. The ones I need are white and have the following markings, C.A. L.I.N.Y A25 2 I would like to get up to 100 pieces if possible.

NEED TO FIND PART# SO I CAN ORDER. CAN YOU PLEASE HELP ME 3 SEPERATE PARTS. THANK YOU

I did not see this part shown on your web site.Can you identify it?I need 6 of these window latches.Richard

I have very old 1999 Komcraft window distributed by Harvey Window... How do I dis-assemble the rear sash of a Double hung window to install the pivot bar.. The window I have has 2 screws on the side of the window near the bottom and 2 near the top but NOT on the bottom of the window frame. So to g ... (cont.)

These windows were installed over 25 years ago. I am looking to order part 26-107 and 26-116. I am struggling to find the tilt latch replacement, photos attached. The latch on top is 2 inches long and .75 inches wid, pictures 1 and 2. Picture 3 shows the thumb latch removed and showing the inter ... (cont.)

I Purchased These Window latches within the last year, they match well, During the install I lost a Plastic Shoulder Pin that inserts into the bottom and holds one end of the Spring in place, Might you have these Pins?????? They are Fanelli Windows Thanks Much, Jim