Viewing all customer Discussions for:

39-107FK Truth Folding Handle And Cover Kit

L 31538A on the part, the winder is inoperable.

I have 2 side by side Anderson casement windows so I need a right and left window crank... the gears have worn out on both windows.. I supplied pictures of the crank it is a Semco 30744 Truth.. please help!

Hello , Are there knob or folding style crank replacement for older Milguard window.?

Please if you know which crank this is

House was built in 1995. Semco casement wood window. Need a replacement handle assembly. Entry Guard Truth on arm 30744. Lower arm reads 4558A. Can you help identify what part I need?

There are markings on one of the enclosures. Some windows swing open on the left and others on the right

the overall body width is 5". The overall arm length is 9 1/4", rivet to rivet is 8 1/2"

I believe this is a truth part. Say LH as can be seen in picture Also the arm has this number 501-11-3L

Hi there. I need to replace 4 of these window openers - help! The markings on them say: Truth (brand) "Entry Gard" 205544

can you tell me what i need?

The short arm attached to the gear has the letter R stamped on the top side and the number 31538A and the letter L stamped on the bottom side The short arm is 3.25 inches center pin to center pin The pivot arm that is attached to the short arm is stamped 20810 The pivot arm is 3 15/16 c to c The l ... (cont.)

I need replacement hardware for my window. Was able to see the words, Entry Gard Truth and the numbers L30841 and 20810. Please see attached photos.

Need part number s for left and right please.

this mechanism is over 25 years old. It's been working just fine for the last three years since we moved in but just failed. I need to repair or replace it. Can you help?

Hello, The worm gear that turns the cogs to open/close the window has become dislodged from its base. I see that there are matching grooves on the side of the worm gear housing and the internal aspect of the base. Can these two parts be put back together again by applying force to the worm gear t ... (cont.)

The crank assembly in pic 5705 will open but not close the window. When attempting to close, the handle screws out. The other photos are of the mitered lower trim pieces on the window exterior. The photos are of 2 different sized windows.

I have two windows that are missing the stem, the cover, and the handle. I read a post from someone to Swisco that I may need to replace the EntryGard Dual Arm Operator, 39-031 and 39-032. I looked at it online and it shows that the long arm is 10 3/4" but mine is only approximately 9 1/2". The shor ... (cont.)

Need to replace rusted out mounting to crank arm?

Looking for replacements. Not sure what I am looking for Thanks

I just bought a number of the biege 14 1/2" tracks, and they are not going to work. This is a simpler track, with a cutout in the bottom to allow the operator "wheel" to snap in place. Four #7 screw holes, and not much else to distinguish it. I need a dozen or so. Thanks!