Viewing all customer Discussions for:

39-107FK Truth Folding Handle And Cover Kit

I am looking to replace 3 window arm operators. Please let me know if you have them, and how much each will cost. The info. on the arms reads as follows: R30842 - This one opens the window to the left I need one. 51538A - This one opens it to the right - I need two.

I am looking for a truth brand dual arm window crank replacement I need about 4 of them. The long arm is 9-3/8" long and the short arm is 7-5/8" long. The base plate is 4-7/8" x 2-1/16". Can you please help me find these parts?

My window crank stopped working. It's stripped or something. I added 3 pictures.1. The number 50471 stamped here really small.2.The whole part needed.3. 30851 is stamped on the arm.The arm swings out to the right when opening.

Hi, I'm trying to replace the window Operator the bolt's teeth in the second picture has snapped off and is stuck inside the third picture. The brand is by Allied Windows which has run out of business. Please let me know if you have this part. Thanks!

On the crank teeth shown in the second photo it says Made in the USA on the left and Truth on the right. The underside of the handle in the first photo says US patent 4,083,264 then Can. Patent 1979 on the lower left and 45012 on the lower right. The cranks no longer grip allowing one to open or c ... (cont.)

I need to replace a operator cover and handle. possible number of a 1413271242831CW. Thank You!

I have a 1992 Viceroy home that has several casement window hardware issues. I want to ensure i get the right hardware to replace them . Viceroy has no Website , so I am hoping you can help me. See photos above ThanksJohn

Looking for milgard casement window operators parts number stamped on #40753 on long arm, #31538A on short arm. The subject windows are approximately 25 to 30 years old and The operators were worn out. Please quote, thank you, Tom

I have a Windsor crank window. The window does not crank close. I am looking to replace this part in provided pictures that is between the handle and the crank. It looks like a metal washer or "c clamp" is broken. Are you able to provide this part without replacing the entire crank? Thank You! ... (cont.)

Hello Swisco, I have a Truth EntryGard operator wheel which is getting bound up on the track holes. The wheel spins freely, but the edge of the wheel is chewed up. I'm guessing the wheel is no longer the correct diameter and that's what's causing it to get bound up. I see the wheel is riveted on t ... (cont.)

see picture. part number stamped 30830

Hello. I am looking to replace 2 casement operators per the picture attached. Can you help me identify the correct hardware please? Thanks!

Opens and closes the window

I have some older windows in my cabin. They are Entry Gard cranks and the numbers I can see are 20810 and R30842. Any chance you have a replacement?

Have broken crank, the turn screw pops out when the crank is turned. I believe I need 39-217, window opens to the left, the single arm is roughly 8.5" long. I also have multiple cranks like this, would like to replace the front of them with 39-107FK, is this compatible?

I'm trying to get these 2 matches

Truth 20810 operator

Hello - I am trying to identify the hardware to replace broken cranks/operators. The photos show Truth and 40942 (left side window) and 40941 (right side window). I have additional photos and videos if it helps. I need 4 left and 4 right. THank you.

I have attached pictures of the casement window crankcase that needs replacing. It is an Entry Gard Truth 3084IL which I believe corresponds with Swisco part 39-031 and 39-032. I could not obtain an exact measurement for the long arm but it appears to be 10" and the short arm is 4 1/16". Will you be ... (cont.)

I think it is Marvin Handle= 10898302 and Case= 10898301 but in Satin Taupe It looks to be what is shown as the "new style" at 5 1/2".