Viewing all customer Discussions for:

39-545 Truth Snap-Stud Bracket

Hi, Can you help me identify this crankset for replacement?

To Whom it May Concern:The number 41011 is stamped on the underside of the long arm. There are six mounting screws, equally divided on the crankset mounting flange.Best wishes,Thomas

Trying to identify the correct replacement parts for the casement operator. Window opens from left to right. Original part manufacturer is Truth. Smaller part of arm is 4-1/2 inches total length. About 4 inches, maybe 3-15/16 from center hole to center hole. Overall width of the crank box is 3 ... (cont.)

This crank is striped out. Older model 22 years old. By the looks of what you have a 1/2" larger in the arm seems to be considered its replacement. Also need the end bracket as mine is bent.

Need confirmation of replacement part. Same dimensions as your 39-171 except arm is 47/8" long not 5". Bottom of mechanism is stamped 45251 and 101509 08:50 etched on back. Thanks for help.

I need a replacement handle and cover for both right and left hand due to damage from installer. i am unable to locate it on your web site. Milgard Series: V300-47 Code: mg-15Thanks

Hello, looking for some help getting a customer the correct replacement operator and hinge. I looked and looked but didn't see anything that matched exactly. Do you have a recommendation that would work?

Please advise which part I need to order to replace as it is strippe. The measurements are on picture. Thank you.

I need a window crack just like this except the crank needs to be on the right hand side of the case. Can you help please?

I need to replace arm and track for this truth casement window made by pella

Hello, have a part that has rusted/broken on the operator arm of my bathroom window. I do not know the window make, do not have a part number. Inserts through a 5in insertion site at the base of the screen. Was hoping on your insight towards finding the exact part or a proper placement. This web ... (cont.)

Need to assembly, right and left side. Any information would be appreciated! Thanks!

I just purchased encore dyad still mount operators # 39-220B and 39-2218 which fit fine. I need a stud bracket (photo attached) which screws into the bottom of the window. I also need the covers and cranks for the still mount operators mentioned above. I found out they are BF Rich windows. ... (cont.)

Hi, please help me identify the parts for this casement window. I would like to replace all the hinges and supporting brackets and the cracking mechanism as well.

Im looking for the correct cover and crank handle for this Mi casement window. The window is only a year or two old. I have some other casement windows that use crank handle and cover part number 39-376, but this one window has a different crank. Is this something you recognize? Thanks, Kaleb ... (cont.)

I need few of left and few of right swing with dual arm as in photos.

Window mechanism on the bottom of the window

41011 on the long arm. 41008 and 31876 on the other 2 arm components.Hope this helps.Thanks

Looking for this window crank. Partial number on gear casement is 03169. Brand is Truth.

Hi I need to replace a crank for my window as it doesn't open since we bought our house.. is it a right or left sided cran based on numbers I just don't want to order the wrong part