Viewing all customer Discussions for:

39-546 Truth Snap-Stud Bracket

I need to replace 10 window crank handles on Gentek windows. Can you tell by the pictures I sent if one of your replacement handles will work for my situation.thanks Bob

handles need 10 left 10 right s

Hello, the wheel/roller on the end of the arm is broken. Don't know if you can just get the wheel or if you have to purchase a whole new unit. The arm is about 9" in length and the channel on the window is about 14.5". Can you make a recommendation?

I think this is A Jeldwen casement handle the solid bar is 10"s the pivot arm is 5"s to the pivot point. the pivot to the end is 4.5"s long. do you have this part in a white finish ? I tried to attach picture not sure if it did though.

HelloI have some old Bonneville casement windows that need hinges and operators replacedI need 8 hinges (see picture) and one set of left and right-hand operators for both operator types. By inside of elbow on notes I mean where the interior bend in the arm starts from the long end (not the gear end ... (cont.)

Hi Swisco - attached photos show our bathroom casement window, with crank opener mechanism. Window was installed in 2001. I am not sure what brand was used by the contractor - maybe the label helps? I removed some corrosion a few years ago and spray-painted the mechanism (beige), but it looks like ... (cont.)

I will send photos. Let me know what else you need. I believe it is a Truth Hardware Encore operator.

Hi there, Can you help me find a replacement window operator? The ID number on the back was 10309 08:08 A, and the one on the arm was 40110 C 3. Thank you, Magali

I am looking to replace this operate assembly

Hi, I'm in search of replacement parts for my four Jeld-Wen casement windows at my beach house. All have signs of rust and need to be replaced. Can you assist will selling me the correct parts?

2 on top of 45352 made in usa on crank assembly botttom 40986 on long thin metal piec e 31876 on arm

I need to replace this part Trith 30744

I need the top and bottom sash bracket for a "Weathershield" window operator. The dimensions are noted on the picture. I think the part number is 40650A

There are no numbers on this operator. I measured each arm pin to pin. I tried ordering one already but it didn't fit.

See photo of TRUTH RH 45136 Single Arm Need both Right Single Arm and Left Single Arm

long arm 41011, short arm 31876, made in USA on 09/17/01

I'm looking to replace several crank mechanism, missing handles, and broken latch.

Not sure of the part number, but it's the part I'm pointing to. The detach clip no longer holds it in place. Not sure I need a new detach clip or new bracket.

I am in need of one left hand and one right hand Hurd Casement window operator. Please see attached info.

casement window operators parts as shown on nte ;pictures