Viewing all customer Discussions for:

39-396 LH 12-1/8" Hinge Arm Assembly, Pella

Please identifiy this operator. I look like the slide on the bottom hing is broken. I have added a photo of the top hinge Thanks

I need to replace the entire hardware on this old window. It opens on the left but the hinges are on the right (looking out the window). The handles keep getting stripped. I can only find a marking on the handle cover plate it says 4 LH; and then another under one of the arms that looks like a WL. ... (cont.)

the single swing arm in the first photo, the crank is present. The crank arm is present. It's the swing arm or the single straight arm that we're trying to find

Hello! I need to replace this system. It should be 9-1/2"I tried: Ellipse Style Single Arm Operator, 9-1/2" and it was not the right part.

I am in need of replacement parts for two Pella Casement windows circa 1980's. The windows are 27" X 51"and have removable storms. They are part of a bay window with one opening to the right and one opening to the left. Any help in finding propper replacement pieces will be greatly appreciated.Tha ... (cont.)

This plate attaches to Pella pivot plate hinge shoe 39-363 or similar. The metal plate has a stud that drops into to a small plate on top of the window frame.

Hello, I have 39-40 year old Pella casement windows. Two of them dont want to close once opened. They dont open great but they do operate that all until you go to get the last crank or two to get it to the lock and it dosent want to come all the way back into the lock.

Hello! 1992 Pella crank out window mechanism is broken ? - do you have a good replacement? Thanks for your help! Kathy

Hello, I'm hoping to identify replacement operators for these casement windows. The current operators have broken pieces or do not catch when cranking to close so the window stays open about an inch. The three sizes of the windows are: 23" x 63" 22.5" x 44.5" 26.5" x 70.5" Also some of the windows s ... (cont.)

708 cc windows. Doesn't quite look like some of the other parts mentioned in other responses as the full slider mechanism isn't connected to the spacer bar. I think the window is from the early 80s.

These are on the bottom of our windows and most have broken over years. Looking for new parts to replace them.

Hello. I'm trying to figure out which replacement part I need. Is for Left hand bottom hinge for Pella window serial #041309 S1200546556. Thanks so much, Kimberly

Arm on the other side (I believe right handed) is bent, need a replacement.

Hello, I think this looks like your Pella operator but wanted to confirm it with someone please? When I turn the crank there is a lot of play & when I shut it, it stops just shy of the window lock lever from catching & have to push it from the outside before locking it. I might need the hing ... (cont.)

Hello. Looking for replacement part. It’s the plastic piece in the track the arm is attached to

Swisco Team:I need to buy a replacement bar hinge. (Photo attached.) The bar is 14". The arm is 9 1/2".14 1/4" hinge slide9 3/4" bar5 /14" under window bar

I am seeking a hinge/roller assembly for a 40+ year-old Pella casement window, as shown in the attached photo. This assembly mounts on the bottom of the wood/aluminum-clad casement window, enabling it to slide as the roto-operator is actuated. As you can see from the photo the assembly is missing ... (cont.)

I'm trying to find just the pella window guide bar. The crank and everything else seems to be working fine. Thanks a lot for any help.

Looking for replacement non-egress hardware for a 1987 Pella casement window. Need top and bottom operator.

Casement