Viewing all customer Discussions for:

18-187 Top Sash Guide Latch Pair

1720v 19"total 18"metal 5/8deep, 1/2 w need quanity 2.24B 26 1/8"total, 25" metal, 5/8 deep, 1/2 whide quanity 16.1120v 13" total 12" metal, 5/8deep, 1/2 whide quanity 2.I also need the stops at the topsome are white with a slid lock, and the original ones are black no slide lock. They measure top o ... (cont.)

Need a complete set of window track parts. Can you identify from attached photos. Window was installed in the early 1970's in Florida's Tampa Bay area. Please quote complete set of parts for one window if available. Thank you.

I need several replacement sliding window top guides and can't find on your site. Is it possible to text you a picture of these? I don't know the window manufacturer and these are relatively old non tilt windows. They are approx 1 inch wide and 7/8 long. Thanks for your help

I need a Window part Sash Guide

Could you provide the item numbers for the bottoms and tops for the Yale-Ogron channel balance ends?

I bought a house with some windows that do not have balancers. The window glass is about 23" and the distance between the top balance hole to I think you call it a Yale catch is 23". Looks like a 1/2 " wide balancer would fit. I don't know if the top holes should have clips or not since they don't. ... (cont.)

Top of channel guide has a notch in the middle close to 19-002 top & 15-002 shoe, could find one with a notch, that apparently catches on a yale stop at 4" from top of frame didn't know how t make this picture smaller? house buitd in the mid 70'S Please let me know for sure.

House built 1981. Frame does not have balance stops. Stops appear to be plastic parts screwed to sash (window) Markings stamped on side 29 8 Need 10 pair

I will be replacing all the window channel balances in my house. I am getting how to determine which series and believe that the length of the metal part of the balance is what determines the size. The stamp seems to be 1"less so I read. My question is that I believe that someone previously ... (cont.)

Hey folks, I got balances that fit for this window and then realized the these pieces were missing as well. They retain the top of the balance in the side of the window. Apparently time and sunlight has gotten the best of them.

The unit was built in '74. It is located in Delray Beach, FL. The aluminum bedroom window is 46"L x 43"W. The number stamped is 1720 and is 18" L x 1/2 "W. I would like to purchase right & Left with the top ivory catch and bottom shoe already attached. I need two handles, and the right and left s ... (cont.)

Our windows are metal and use the 18" 1720 channel balances. I have purchased the balances and have attached new hardware to each. However, when we went to replace each of the channel balances, we noticed that the top sash guides on each side of almost all of our windows are broken. I have lo ... (cont.)