Viewing all customer Discussions for:

33-090 #8 x 3/4" Philips Pan Head SS Screw

I am making 14 new double hung wood windows, not tilted. Top part will be fixed, just bottom part will be moving. Window size 33" X 88" Can you provide me with all parts specification which I need in addition of Spiral balances to make bottom part open. Thank you.

Trying to fix a window with several problems. 1. Missing slide latch on right that allows window to tilt out. Slide is 2 inches and slot it is from is 7/8 inch . see picture. 2.Have broken window stoppers or "sash stops" I believe. 1 1/8 inch long unsure how wide. 3. Top window falls down wi ... (cont.)

Hey This is the upper sash balance. The bottom sash balance is a spiral sash (same as Series 500). The diameter of the sheath (if you like) is 7/16". The length of balance is 29 1/2". Other dimensions are in the pics. I've looked and cannot find anything like this. Cheers Peter

Do you have this screen clip?

Hi I need replacement spiral balances. the dimensions are in the photographs and the diameter of the tube measures 9/16" (so I guess it is a 5/8" tube).

The strips I am trying to replace hold both the storm window and screen. I remove them twice a year to put in the window in the windter and the screen in the summer. Two Strips are 29". Two strips are 73". End dimentions are side 1 - 5/16 top - 1/2

Hi, can you tell me what size screws go to the mobile home window locks part number 90-009? I have some windows without locks or screws.

Recomended screws (white if available) for: 70-210 Flush Clip 70-072 Insert Clip, 3/16" offset

I have storm windows and screens that are interchangeable and are held in place on the outside of the sunroom against the framing with clips that have internal springs to apply pressure. The pressure applied by the clips is the only thing that holds the windows or screens in place. The clips al ... (cont.)

Hi, Great site! I have a Milgard Series 1510-S with a busted channel balance. The window installers or previous owners took out all of the take out clips on all the single hung windows in this house. I have no idea if the 16-009 will work for the windows. More information on the sticker that ... (cont.)

Before i place an order i would like to make sure of a couple things and find out about another. i think i have the right spiral balances, series 600 18" (I measured) blue tip? The 1/4 screw plug seems generic? And lastly, i am kind of lost on the internal latches and sash releases. Ca ... (cont.)

I need to replace all four parts of the snap in glaze glazing that holds the glass part of the storm door. the measurements are 2 pieces measuring 74 3/4 in & 2 pieces of 29 in. The width were the glazing snaps in measures 1 1/8 of an inch . Please let me know if you provide this product. ... (cont.)

What size screw fits the hole in the 70-086 clip? Is it pan head? How far below the clip would a 3/4" screw project? Do you carry such a screw in stainless steel (or other non-rusting in a seaside atmosphere) with a white head? Thanks.

Hello, I am trying to figure out between part#900-19869 and 900-19875 to order. No brand name on the windows. As you can see in the first picture where I took the latch out of the sach, the end of the latch (the arrow shape) part is broken and I don't have the exact measurement of that part (shown ... (cont.)