Viewing all customer Discussions for:

26-408 Tilt Latch Pair

I need to replace my pivot locking shoes and latches for 2 tilt out windows. Both of the pivot shoes and latches are broken. Balance has 28B BSI stamped in it.

Have these worked for customers? I see that a critical dimension does not appear to be correct...my latches look exactly like the photos, but I am concerned about tolerances (the 0.160" dimension looks incorrect, as mine is less than 0.125", so I am worried that the latch will not snap in tightly en ... (cont.)

I need 3 sets if CV BAL and corresponding shoes, fir a 14 lb sash. pictures to follow. I also need 5 sets of insert tilt latches. I recently purchased some but they were too small. The ones I purchased were 26-266 and 26-267. These were smaller than I needed. The size I need is 2 7/7 long. The "T" i ... (cont.)

Nami window saftey clip need one for right side.

What do you recommend for this one. I pried the old latch out of its hole.

Hello guys, I

Si nor have the brand of window . Double hung windows . Missing a latch which allows the windows to fold out to clean

Hello, i have this 8500 series double hung windows and i need to replace the tilt latches. I canoot figure out how to remove them. I broke one while trying. Please let me know. Thanks

Hi, I'm trying to find a replacement part for a window I installed a very long time ago. I think it's called a latch. It's the piece that keeps the window in the track and, I think, allows it to be tilted inward. The number on the jamb is 8501-1 110304-5 I bought the window in Philadelphia, PA, ... (cont.)

six windows with broken tilt latches. Numbers are in IMG_0870

Please see attached photos.

I HAVE A SILVERLINE WINDOW WITH BOTTOM SECTION WITH BOTH LATCHES BROKEN, L+R.

looking for replacement part for tilt in latch for vinyl windows. see attached photos

I have looked at the dimension on these parts and it seems that they would match with 26-244, 26-243 and 26-408. Pictures are as follows: pat 5139291 10H = Top view broken piece may correspond 26-243 or 244 pat 5139291 10H-2 = bottom view broken piece may correspond to 26-243 or 244 pat 5139291 ... (cont.)

pat 5139291 latch in place pat 5139291 10H upper view -broken piece pat 5139291 10H -2 bottom view- broken piece 8590-1 upper view 8590-2 bottom view See pictures attached I quickly checked the dimensions and it looks to me that pat 5139291 corresponds to your part 26-408 and 8590 c ... (cont.)

Do you have this latch?

Hi I'm in need of a replacement for the 8590 tilt latch (L & R). Does your 26-408 match the dimensions for the 8590 exactly? Appreciate your help.

I ordered 6 they were wrong. I'm trying to get 4 right and 4 left . I sent the photos Thank you for your help

Hello I ordered some tilt latches last week. The size is not common so I was happy I found them at your site. My question is the little tab that ultimately holds the window in place seems to be a little wide. I had to try and use a dremel to shave it down to fit like the old one. Is there another ... (cont.)

I am trying to find this plastic part. The window is made by Stanley. Help would be much appreciated.