Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

help with identify the correct weather strip.

I need tio replace ther weatherstrip at the bottom of a vinyl Certainteed window. It snaps into a channel at the bottom of the window. Any idea of where to obtian?

Attached photos are of bottom outside seal weatherstripping from Gorell model 5305 double hung window. Need replacement weatherstripping.

I'm looking for sash bulb replacement for my MI Windows, single hung model 3540. Thank you.

Please use the attached photos to identify SWISCO replacements for the following.Coil Balance 1/2"WCoil Balance ShoeCoil BushingCoil Balance CapPivot Bar 3-1/16", 2 Hole (1"c-c)T-Slot Foam Filled WeathersealFYI: ViWinTech windows manufactured in 2001 (see attached Lower Sash Label ^Missing Frame La ... (cont.)

Need stripping that looks like that to slide in underneath the bottom of my double hung windows

Overall width including foam and flat vinyl: 7/8" foam area: 3/8" Width of t track: 3/16" width of flat vinyl: 1/2"

The outside seal needs replacing.

I am looking for this tilt latch. Is it 26-021, 14447 or something else?

What seal do I need? Outside bottom sash seal on a Simonton vunyl window I think it's 58-183

Need 12 new seals for 2 different width windows. can you send a sample to make sure it's correct part? Theres a picture of the label off the window with what looks like window/part numbers H-R20-46x77 H-R25*-38x77 H-R35*-38x77

I hope these pictures will help figure out this weather stripping. It is in bad shape on all windows. I have 5 windows with this strip across the bottom. The sides have a different strip but I would like to got the bottom replaced before I get to the sides.

I looked on your website and could not locate a match for this glazing. Can you assist with a product sku or item number that will fit my application? Thx Dave

I am in dire need of replacement weatherstripping for my Certainteed windows I have 5 of these windows that measure 27" X 43" and all the weather stripping is in need of replacement

Installed in dec 2002, new house build.

I have a piece of foam insulation what was bent out of shape and had to be removed and I'm trying to figure out what to buy to replace it. It snaps into the frame as shown in the photos. Thanks!

Need help in identifying correct T-SLOT OFFSET HOLLOW FOAM SEAL part. Appears 7/8" wide, bulb ~ 3/8 to 1/2" and T ~ 3/16". Pictures attached. Mick

Need help selecting replacement part for this stripping.

T Slot is .187 Bulb is 7/16 Total width is 7/8

I need replacement weatherstripping for my Silverline window