Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

I wanted to see if yall carried replacement weather stripping to replace this item. Thanks Jay

Hi, looking for help getting replacements

11 windows 33" width with kerf slot for mounting.

I need to replace two broken balances. They both broke where spring attaches to the pully. I dont see any mfg info but balance channel is stamped 28C BSI. I would also like to replace bottom vinyl seals.

To whom it may concern, Hopefully these pictures are what you need to identify the correct size bulb weatherseal i need. If you need more pictures let me know . Thanks,Keith

weather strip foam tube portion approx 5/8" T-on retainer 1/4 inch (0.270 in?) hgt of retainer approx 1/16" Windows installed late 2015

Simonton replacement windows, vinyl double hung. Bottom window gasket completely deteriorated. Installed in 2000. Tried to include tag in window.

need 4 pieces 28" and one piece 20"

This seal is only installed on the bottom of the window. The house was built in 2000 and these are original windows. The seal slides into a groove in the window frame and it is on the outer side of the window

Trying to figure out what kind I need to order to replace. All of my window weather seal is dry rotting

This seal fits at the top of my bottom pane and sits against the bottom of the top pane when the windows are closed. I believe this is considered a kerf.

Hello, I need a replacement seal for this window sash. Pictures attached.

This is the stripping on the lower sash that fits in an exterior channel of vinyl window 52-2905-white.pivot clean type. Overall length is 32inches.

Weather strip for Jeld wen window. I have attached photos and window etching

Can someone hlep me identify this weatherseal strip I pulled off the bottom of my window? Or could someone suggest one that could work for a replacement? I've put the measurements in the picture.

I have MW Doiuble hung wondows. Wanted to know what weatherstrip can I use. Thanks,

Needing window stripping for 7 windows. I've just moved into this home, I have paper work that says they are Pella windows but Pella says they can't help me. So here I am, please help me. As you can see, the stripping has an extension on either side, one wider than the other. I can only assume tha ... (cont.)

I have MI Windows model 9555 double hung windows from about 25 years ago. I need bulb seal replacement for the bottom sash. Is your product 58-182 a correct fit? If not, what is the correct selection? Thank you.

Aluminum windows, no visible numbers or mfg markings. Channel is 1/4" Overall plastic piece is 5/16' overall height w bubble is approx 7/8" but sponge bubble is pretty deteriorated.

The t that slides into the groove is 3/16's wide the foam piece is 5/16 in diameter The width of the entire piece is about 13/16 with thw weatherstripping