Viewing all customer Discussions for:

91-054 Nylon Slide Bolt Pair

Looking for a replacement latch for my storm windows.

HI, I believe your 91-054 nylon slide bolt pair will work but you're out of the nylon springs 91-003, will the metal 91-003M work OK with the 91-054, or will the metal cause too much stress on the nylon slide bolt? Thanks

HI WE ARE LOOKING TO ORDER 20 LEFT HAND AND 20 RIGHT HAND SLIDE BOLTS FOR OUR VINYL PRO WINDOWS. INSTALLED ABOUT 1997-1999

These are the latches from the storm panel of an RV. It is a 2016 Rockwood 232ESP by Forest River. I'm looking for 2 each of both LH and RH latches. Thank you!

Hi, I need to replace the slide latch on my screen windows. I've uploaded a picture with measurements. They are right and left handed. I think they were originally white. I need 3 pairs, but I can't figure which latch to buy. Do you also sell replacement double panes gas filled windows? We'v ... (cont.)

I need latches for my storm windows. Please advise if you can provide.

Part is 3 inches by 1/2 inch and the only marking is a R I believe to indicate right. The material is plastic and has a spring on the back side

This is my screen latch which is 3 1/2 inches long by 1/2 inch wide and all plastic. Looking for replacement.

Am in need of 5 pair of 4" X 1/2" white nylon window latches as above

Hello, I have 7 storm windows with many parts broken. The corner latches are 3 13/16 inches with the point and the notch for fingers is 1/4 inch from end and 3/4 inch long. They are 1/4 inch wide. The end with the point has a tab (see photo of latch in place) that sticks out for 5/32 inch past t ... (cont.)

Care-Free latches. Can't find them

I tried to order the 91-056 and -057 but they're discontinued. Do you have a replacement to recommend? Metal is ok too.

Plastic, spring sliding lock

Good morning, Please see attached, and help me find the right parts. I believe the length of the latch is almost 4 inches. Thank you for your help, Rami

Couldn't get mechanism out of channel without breaking piece. I'm not super mechanical anyway. It is three inches long, slot it fits in is 1/2 inch wide. Finger pull area is 5/8 inch long. It has a spring in it to pull back and forth. It has a slight angle on end where it fits into edge ... (cont.)

Need a slide bolt for the above storm window. in picture #2 correct one is in storm and broken one just below. In picture #1 shows how it should be.

Please note M marking/logo on enclosed pic.

4 inches long Barrel 7/16 wide 1/4 in thick

I saw a video about having to drill out some frame screws. Our frame doesn't appear to have such screws. However, after 30 years, the plastic tips on many windows are broken, and we need to replace them. Appreciate your assistance in how to do that and if you have a suitable replacement part. ... (cont.)

slide bolt made of plastic 1991 vintage looks like 91-054 what do you think? end of it is broken off