Viewing all customer Discussions for:

21-175 Pivot Bracket

It looks like I'm missing the pivit pin for my 15x15 mirror bi fold door. Please let me know if u can buy the pin or even the whole assembly if that's the better option. Thank you

Am needing sliding and stationary parts (top and bottom) and bottom rail (36 inch) for bi-fold closet door. I've included several pictures for your review. Please let me know if additional info is needed for your complete review. Thank you.

Lookin for a low profile bottom rail for 2 sets of Stanley mirrored bifold doors. Vintage around 1999 or 2000. Each rail was 1" × 1" x 60" long. I need a low profile rail after installing a new floor. Will the 21-455 work? Does it come in any other color? Will I need to order extra parts. Thank yo ... (cont.)

I can't tell what is wrong with this bracket. It tightens up in the track but then slips when the door folds out. Would you recommend replacing the entire top track and hardware?

This is what I need it's for a wall of mirrored by fold doors. This is a pivot support for the bottom of a mirrored bi fold door, the pin is a stationary one. 17-4460 is stamped on the bottom of the part.

I need 2 of the large adjustment screws, 6 of the plastic glides and 2 of the metal door retainers. Thank you for any assistance you can offer.

Hi need track, guide and hinge point

I can see Stanley on one of the parts! The hinge point. Need track also hinge point and guide

Looking for replacement Track and Hardware, the only visible indicator of a name is possibly ROME although its not very visable. we need around 30 or 40 sets for a hotel.

Help finding the correct part.

I purchased used Stanley mirror bifold closet doors, no hardware was included. I am having trouble finding the right track and hardware to install. Are you able to advise what track and hardware is needed?

PLease help me ID these parts.Best Regards,Jorge

I am replacing the top and bottom track a of Stanley 36" bi-fold mirror door. The top track is 36"Lx7/8"D x 1 1/8"W. The bottom track is 36'L x 1/2" D x 11/8"W. Can I use track part 21-401 for top and bottom tracks and what other hardware do I need?

Hi Have recently moved into a house and the closet door appears to be missing pieces. I'm uncertain what to order. The top of the door has a pin but the track doesn't have the piece that the pin needs to go into so that I can close it. The bottom of the track has the piece that the pin goes into, ... (cont.)

I have a 20-22 year old Independent Mirror Industries, Inc. (Canada) 36" mirrored bifold door. In the process of removing it temporarily for a bathroom remodel, we ruined the bottom track, which was "grouted" to the floor tile. I need the bottom track, PLUS I should just go ahead and get the top tra ... (cont.)

I am trying to find the replacement for the pictured item. The picture is of a bottom rail with the pivot that is damaged. All I know is this is a Stanley door.

I am interested in purchasing new tracks for my mirrored bifold closet doors. The opening is 5 inches deep; 80 inches high and 32 1/2 inches wide. My current bottom track is 1 inch high. I need a track that is 1/2 inch high. My current doors measure 78 high. I have 2 panels each measuring 15 3/ ... (cont.)

I recently moved into a house that had two sets of Stanley mirrored bifold doors (about 35" width each). Both opened and closed with difficulty and I found that one door's weight was resting directly on the track rather than the bottom pivot bracket. After investigating, I suspect neither door has t ... (cont.)

Track is 36" long by 1". (one of 2) Left upper pivot will NOT stay in place. Threaded screw hole is stripped. Other hardware is worn or no longer works. (Did until a few days ago) I need everything but the upper and lower tracks. I want to fix the left door and have extra hardware if the right ... (cont.)

Hi, We are in need of six new pivot blocks for the corner block pins . I think our corner block pins are in good condition wasn't sure if there should be spikes at the top or if we are missing a part could you please look at photos and give us an opinion. Might as well throw in six plastic roll ... (cont.)