Viewing all customer Discussions for:

10-325 30" Shower Sweep With Drip Rail

Hello, I just moved into a house and the shower is leaking pretty bad. After looking at the bottom of it I can see the seals are missing. Don't have a clue what pieces or seals I need. If you could help tell me what I need I would very much appreciate it. Thank you - Mindie

Dear Swisco, I need a replacement shower door seal. And I buy 2 for you and not working. Can you help me how I can retur the last one I buy to you guys back .can you let me now what is the correct seal I need thanks you

The water stays in the lip of the metal piece, then leaks on the floor when you open the door. I think a rubber sweep would work, but I don't know what to order. Thank you,Robin

I'm looking for a shower door sweep that has three screws to attach to the door. My old one has a grey plastic sweep. Do you have anything like that?

The sweep is breaking and needs to be replaced, but perhaps enitre drip rail needs to be replaced ? Can you help? Thank you!

Hi, I have a few questions about your Shower Sweep With Drip Rail: 1- Can I order model 10-325 or 10-326 without pre-drilled holes? 2- If not, how many pre-drilled holes are there in these models? Mine is about 27.5 in, and the locations of the holes do not match with your drawing, so I figure if I ... (cont.)

Have a 30 inch shower sweep with drill holes about 2 inches apart. I bought a part from you guys 2 weeks ago but wasnt the right thing.

Dear Swisco, I need a replacement shower door seal. I've included 3 pictures. #1 is what I just bought that was too big to fit into the slot, and then not wide enough. #2 and #3 are pictures of the shower door. Any help would be greatly appreciated. Thanks, Ken

Please assist. When I unscrewed it to change had a flat rubber piece behind the metal and under that was some double sided tape like material I guess to make it more water proof. Cannot find the parts anywhere in Shreveport. Y'all rock and thank you for the help!!

Hi ,Even with the door closed the shower is leaking through the openings where the hinges are. Additionally, it leaks out the bottom. Can you recommend different plastic/vinyl seals or in liner to put on the bottom and in the area where the hinges are? We will eventually replace the bathroom but wou ... (cont.)

We have an old shower door in which needs new metal replacement sweep. It measures 25"long. Anything you can suggest?

Hello, I was wondering if you have a shower door gasket that looks like this one. Thank you

This is a mobile home shower door. I cannot find the correct sweep. Can you help?

Looking for correct replacement

Have a 27" chrome shower door, the gutter screws on with 4 screws starting about 1 1/2" in. I know I can hacksaw to size, how many screw cut outs do yours have and in what locations? Will you cut out screws holes if I give you the location?

Original is so soiled & corroded . . . Is it worth cleaning/sanitizing ? Considered removing & running through dishwasher. Also need gray vinyl/rubber sweep approx 28? longShower door is 27 1/2" wide. Drip rail is 26 1/2? long with 3 screws that are 10" apart. I would like to ... (cont.)

The metal drip plate attaches with 4 screws and measures 27 and 5/8 inches end to end, but 26 5/8 to the notch that was cut out by the installers. The metal part is fine. However, the rubber sweep is rotted. that is really the only piece I need. It is 25 inches long and the channel or groove it ... (cont.)

It will not let me upload the photos. If you email me I will respond with a couple of pics of the drip rail I am looking for. thank you, Jason

Looking for the correct replacement part.

I have one of your shower doors, and they vinyl sweep is no longer good. I'm trying very hard to replace it, but I can't seem to find one shaped like the one I'm replacing. Any help would be greatly appreciated! David