Viewing all customer Discussions for:

10-325 30" Shower Sweep With Drip Rail

Door sweep for shower door

Please see attached photos. Just need the vinyl shower door sweep. The aluminum drip flange is perfectly ok. Do you have some that matches?

hi there I was going to replace this whole shower unit only because of the seals but I figured maybe I take a chance on just finding the seals first can you let me know if you can figure out what replacement parts I would need.. I also consider doing clear Glass, and if I purchase the clear glass ma ... (cont.)

I'm looking for this replacement. Its 27.5 inches. Also here is a photo of my shower.

I am looking for a shower door sweep. the old neo-angle shower is about 23 years old. The pics above show the slot for the "T" sweep. It measures close to 7/16" wide.Thank you,Randy

I need to replace the rubber part or the entire thing. I need the same size for two shower doors 26.8 inches. Thanks on your help

Hey there - I'm in search of something similar to your Product Code: 10-325, only for a frameless glass door. So it doesn't screw on - looks like it's just a snug for with some caulk. Any suggestions? Thanks in advance.

I have been trying to find a replacement strip for a shower door sweep. See attached photos. The lip on the top of the strip has a slight downward taper. The width of the track on the sweep is 0.15 inches. Thanks, Fred

Please respond.

Hello I'm looking for a sweep that is 27 inches long and around 1.5 deep I'm hoping for one that is similar to this but has plastic sweep as well that extends under the drip.

Please advise me what model shower door sweeper number is this. My is JohnI would to order two pc please.Pls advise ASAP.

The shower door sweep as shown above with the drip rail needs to be replaced but since there is no name on either the shower or door we have been unable to find any parts. We are willing to replace both the sweep and drip rail if easier . The actual width needed is 25 3/4 inches . Is there a part th ... (cont.)

The length of the sweep is 30-1/4. The total height of the sweep is 1-1/8. The width of sweep from mounting frame to end of drip is about 5/8.

Is this made from aluminum? If not, please advise metal type.How many fastener slots does this have?My existing door doesn't have fasteners or fastener holes for a sweep. Would self-drilling stainless steel screws be appropriate for mounting this sweep?Thanks!

I need to replace the vinyl / pvc water seal on the bottom of my swinging shower door. It seems to be several peices I need. Can you tell me what to order? Thanks - Candace

Hope this picture is clear enough to identify part. Top tee shape is 1/4 inch wide. Drop down seal is 3/4 inch in length. Tee shape slides into a drip edge track on door. Thanks for any help you can find. Mike

The bottom seal slat of my shower door is coming loose. It is held in place by some sort of adhesive tape that is double sided and fairly thick. I need to replace it all as the seal part at the bottom is disintegrating. It is a Aquaglass shower. Can you help??

Hello, I just moved into a house and the shower is leaking pretty bad. After looking at the bottom of it I can see the seals are missing. Don't have a clue what pieces or seals I need. If you could help tell me what I need I would very much appreciate it. Thank you - Mindie

Dear Swisco, I need a replacement shower door seal. And I buy 2 for you and not working. Can you help me how I can retur the last one I buy to you guys back .can you let me now what is the correct seal I need thanks you

The water stays in the lip of the metal piece, then leaks on the floor when you open the door. I think a rubber sweep would work, but I don't know what to order. Thank you,Robin