Viewing all customer Discussions for:

10-325 30" Shower Sweep With Drip Rail

what are the dimensions of Product Code: 10-325

We need to replace the metal strip at the base of the shower door. Manufacturer is Naidraug. Door opens out with a handle. Door is 26 inches wide and 70 inches tall. Metal strip is 26 inches long and 1 inch wide. Strip has screws at ends. We also need the plastic door sweep part. ... (cont.)

Hi - Can you help with a seal/sweep for the bottom of a framed shower door? There are no marking on the door or the drip rail. Approximately 6 years old. Thanks

I am looking for a replacement to my 2015 Dutchmen Kodiak 221rbsl travel trailer shower door sweep. The old one appears to have a semi circle head. Thank you!

I'm looking to replace my chrome drip rail and sweep for a framed shower door. The width for these would need to be 27 inches. The shower door and stall are original to the house (built in 2013), and I believe is part of the American Standard Prestige series. Can you help me locate the replacement p ... (cont.)

not sure what I need..bought something from Home Depot and plastic is so stiff it doesn't fit over rod..anyway you you can figure out what I need? Can't make out numbers on door handle..thank u

I'm looking for a replacement vinyl sweep for my shower door. Drip tray and sweep are shown in the attached photos.

I need the bottom rail seal for my shower door Here are a couple of pics to see if you can help me get the right one. Thanks

I just received a new shower sweep with drip rail (#10-325). It came with a 3/4" black vinyl sweep, but the sweep is too short to reach the tile, is there a compatible 1" replacement sweep that will work with this new rail I purchased? (I don't need to replace the rail, I want to buy a wider compati ... (cont.)

Hi - I recently purchased from you guys the 10-325 30" Shower Sweep With Drip Rail. Unfortunately, the screw holes didn't align (I believe the part I ordered only had two which were far out wide) while the one I needed had three placed evenly along the rail. I took photos of my old one which got ben ... (cont.)

Hello, I am looking for a bottom sweep for 1/4inch thick completely framed shower door. Approx 36in in length. Thanks James

To Whom It May concern: Im having trouble finding this plastic/rubber part that slides into a groove on bottom of my swinging shower door. I cant find the door model which is installed in a manufactured home. The strip is about a 1 1/4 " wide. Do you carry this product?

Hello, This slips into a vertical channel next to the shower door. Hoping you can direct me to something close :) THank you!

I need to replace a rubber strip in a metal framed shower enclosure. The strip is in a slot in the metal in the door opening on the strike side, and keeps water from escaping between the door and frame. The existing rubber strip is gray and 3/4" wide, with a triangle shaped top that goes in the sl ... (cont.)

Can this be used on a shower door that swings outward? Would have to use double sided tape to install.

Hi. I can't seem to find online a strip and bottom seal that fit my 22 1/2 inch door. The strip itself is 22 1/4 inches. Not sure if I can just purchase the vinyl seal, or five need to strip and the seal

I.m looking for shower door sweep with aluminum drip rail

Need to get some help in picking the right sweep. As noted in the 1st picture there is a drip rail, which appears to be glued on. Am I better off replacing the entire unit. The condo was built in 2004.Thanks,Jack

We just moved into an older property with this shower door. Do you have a sweep you would recommend for this 1960's original door?

Hello,This is not a clear door. There are no markers that I can see. It is old and the sweep has a dip. The ones I was looking at on the website do not have this, and I was wondering if it would work for my door.Thanks, Mary Lou